国产精品久久久一区二区三区_国产一区二区三区视频在线_国产精品一区二区不卡_精品在线一区二区

DI-1M-IP500日本CEDAR扭力測試儀

Management of air tool / oil pulse tool
●Torque Tester 　DI-1M-IP　series
DI-1M-IP50
Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element,  and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use）  □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.  
Specification ＤＩ-１Ｍ-ＩＰ５０ ＤＩ-１Ｍ-ＩＰ２００ ＤＩ-１Ｍ-ＩＰ５００
Measuring range   （at the time of Track）
0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
 Peak down Operating range 0.70N?m～, 7.0kgf?cm/ lbf?in～ 7.0N?m～, 70kgf?cm/ lbf?in～
Accuracy ±0.5％（F/S）（499 or less digit±3digit）
Display The 4 figures digital display of LED
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold
T-R  Track Indication of real time torque value.
P-D  Peak down Indication peak down point ａnd hold.
Display zero clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
Blow Measurement range Zero to 99 blow
Measurement time 0.1 - 9.9 seconds
Data output RS232C conformity （baud rate 9600）
Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save 5 minutes no use, automatically switch off.
Charging time From empty - less than 6hours
Continunous working time 8 hours
Meter part　Weight About 600g
Detection part　Weight about 600g about 1kg about 2.5kg
Meter part　Outside size 146（W）×115（D）×48（H） （It does not contain by the projection part）
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）
 Attache case ― ―
AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.）
An inspection report, a proofreading certificate, traceability system figure
Detection machine size figure
 Detection machine outside figure
Form ＩＰ５０ ＩＰ２００ ＩＰ５００ Detector size
Ａ Φ50 Φ60 Φ80
Ｂ 63 73 99
Ｃ 10 10 15.5
Ｄ Φ90 Φ110 Φ140
Ｅ Φ74 Φ90 Φ116
Ｆ（Three division） Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 9.5ｓｑ 12.7ｓｑ 19ｓｑ
Weight 632g 1.8kg 3kg

DIS-IP500日本CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DIS-IP200日本CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DIS-IP50日本CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DIS-IP5日本CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DIS-IP05日本CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

最新產品
熱門儀器： 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質聯用儀 壓力試驗機 酸度計（PH計） 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質 生物試劑
国产精品久久久一区二区三区_国产一区二区三区视频在线_国产精品一区二区不卡_精品在线一区二区
亚洲一区二区精品在线观看| 国产亚洲精品久久久久久| 久久九九99| 久久久久久亚洲综合影院红桃| 久久精品主播| 欧美高清在线| 欧美岛国在线观看| 亚洲一区在线直播| 久久精品国产一区二区三| 免费在线成人av| 欧美精品一区三区在线观看| 欧美午夜精品理论片a级按摩| 欧美成人精品h版在线观看| 午夜在线播放视频欧美| 国产欧美亚洲视频| 狠狠久久婷婷| 欧美一区1区三区3区公司| 精品动漫一区二区| 国产精品毛片在线| 午夜一区二区三视频在线观看 | 欧美www在线| 欧美日韩国产色站一区二区三区| 国产亚洲在线| 亚洲精选中文字幕| 欧美日韩另类在线| 亚洲一区二区三区乱码aⅴ| 欧美性大战久久久久久久蜜臀| 欧美一区1区三区3区公司| 久久精品一区二区三区四区| 国产综合激情| 欧美日韩国产黄| 狠狠爱综合网| 亚洲欧美日本精品| 欧美国产一区二区| 国产欧美日韩一区二区三区在线 | 久久夜色精品国产| 亚洲手机成人高清视频| 国产精品乱子久久久久| 亚洲一区免费观看| 国产真实久久| 欧美日本一区| 亚洲天天影视| 久久一区二区三区国产精品| 欧美激情视频给我| 国产一区二区三区高清| 一区二区三区四区在线| 久久嫩草精品久久久精品| 国产精品爱久久久久久久| 亚洲国产婷婷综合在线精品| 欧美一区午夜精品| 欧美亚男人的天堂| 亚洲人成在线播放| 久久综合九色综合欧美狠狠| 国产精品主播| 亚洲婷婷综合久久一本伊一区| 欧美11—12娇小xxxx| 国产亚洲在线观看| 亚洲欧美国产精品桃花| 欧美日一区二区三区在线观看国产免| 亚洲国产欧美一区二区三区丁香婷| 久久国产色av| 国产深夜精品| 亚洲欧美日韩久久精品| 国产精品av免费在线观看| 99国产精品99久久久久久| 免费在线欧美视频| 在线 亚洲欧美在线综合一区| 久久se精品一区二区| 国产欧美一区二区三区沐欲| 亚洲综合日韩| 国产精品普通话对白| 亚洲一区二区高清视频| 欧美午夜大胆人体| 这里是久久伊人| 欧美三级乱码| 亚洲网站在线| 国产精品理论片在线观看| 亚洲一二三区精品| 亚洲国产精品va在线看黑人动漫| 久久精品一区二区三区不卡牛牛| 国产一区二区三区久久精品| 欧美在线综合| 国产午夜精品理论片a级大结局| 午夜精品久久久久久久99黑人| 国产精品视区| 欧美一级精品大片| 国产色视频一区| 久久久国产精品一区二区三区| 国产最新精品精品你懂的| 久久久久国产精品人| 在线播放不卡| 欧美成人一区二区三区片免费| 亚洲国产日韩在线一区模特| 欧美精品情趣视频| 一区二区三区高清视频在线观看| 国产精品www网站| 午夜一区不卡| 国内成+人亚洲| 另类酷文…触手系列精品集v1小说| 亚洲福利在线观看| 欧美理论大片| 亚洲与欧洲av电影| 国产亚洲综合性久久久影院| 久久免费黄色| 亚洲精品黄网在线观看| 欧美日韩在线看| 午夜精品区一区二区三| 国产综合av| 欧美成人免费在线观看| 国产精品99久久99久久久二8| 国产精品免费在线| 欧美一区2区三区4区公司二百| 狠狠色噜噜狠狠狠狠色吗综合| 欧美成人亚洲成人日韩成人| 一区二区三区四区国产精品| 国产人成一区二区三区影院| 久久亚洲综合色| 99成人在线| 国产日韩成人精品| 蜜桃久久精品乱码一区二区| 99视频在线精品国自产拍免费观看| 国产精品毛片| 噜噜噜91成人网| 一区二区三区欧美成人| 国产日韩欧美在线看| 欧美大胆a视频| 亚洲欧美第一页| 精品99一区二区| 欧美日韩色一区| 久久av一区| 亚洲乱码国产乱码精品精可以看 | 国产欧美日韩激情| 麻豆精品精华液| 中文在线不卡| 狠狠综合久久| 欧美日韩亚洲视频一区| 久久久精品欧美丰满| 99精品黄色片免费大全| 国产自产2019最新不卡| 欧美日韩精品在线观看| 久久精品欧美日韩精品| avtt综合网| 韩曰欧美视频免费观看| 欧美日韩中文字幕精品| 久久久亚洲人| 亚洲午夜精品一区二区三区他趣 | 最新国产乱人伦偷精品免费网站| 国产精品久久久久国产精品日日 | 国产日韩欧美a| 欧美激情一区在线观看| 欧美在线free| 夜夜爽av福利精品导航| 在线观看成人网| 国产精品视频福利| 欧美区亚洲区| 美国十次成人| 欧美一区二区网站| 一区二区三区欧美在线| 亚洲高清不卡av| 国产亚洲欧美日韩日本| 国产精品福利影院| 欧美精品乱码久久久久久按摩| 久久人人97超碰国产公开结果| 亚洲欧美日韩视频二区| 9l视频自拍蝌蚪9l视频成人| 亚洲电影免费观看高清| 国产一区二区中文| 国产精品老牛| 欧美日韩日本国产亚洲在线| 久久婷婷一区| 久久成人精品| 亚洲欧美www| 一区二区三区精品视频在线观看| 亚洲国产三级网| 影音先锋欧美精品| 国内精品久久久久久久影视麻豆| 国产精品日本一区二区| 欧美三级视频在线| 欧美日本高清一区| 欧美国产一区二区在线观看| 裸体歌舞表演一区二区| 久久久久88色偷偷免费| 久久国产精品高清| 欧美一区二区三区播放老司机| 亚洲在线免费视频| 亚洲午夜极品| 亚洲午夜在线| 亚洲视频axxx| 夜夜爽99久久国产综合精品女不卡| 亚洲全部视频| 亚洲精品日产精品乱码不卡| 亚洲国产精品久久91精品| 尤物精品在线| 尤物精品在线| 亚洲大片一区二区三区| 亚洲春色另类小说| 在线看国产一区| 亚洲成人在线视频网站| 亚洲第一网站免费视频| 亚洲高清在线精品| 亚洲国产另类久久久精品极度| 在线日韩一区二区| 亚洲国内自拍| 日韩视频亚洲视频|