国产精品久久久一区二区三区_国产一区二区三区视频在线_国产精品一区二区不卡_精品在线一区二区

DI-1M-IP200日本CEDAR扭力測試儀

Management of air tool / oil pulse tool
●Torque Tester 　DI-1M-IP　series
DI-1M-IP50
Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element,  and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use）  □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.  
Specification ＤＩ-１Ｍ-ＩＰ５０ ＤＩ-１Ｍ-ＩＰ２００ ＤＩ-１Ｍ-ＩＰ５００
Measuring range   （at the time of Track）
0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
 Peak down Operating range 0.70N?m～, 7.0kgf?cm/ lbf?in～ 7.0N?m～, 70kgf?cm/ lbf?in～
Accuracy ±0.5％（F/S）（499 or less digit±3digit）
Display The 4 figures digital display of LED
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold
T-R  Track Indication of real time torque value.
P-D  Peak down Indication peak down point ａnd hold.
Display zero clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
Blow Measurement range Zero to 99 blow
Measurement time 0.1 - 9.9 seconds
Data output RS232C conformity （baud rate 9600）
Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save 5 minutes no use, automatically switch off.
Charging time From empty - less than 6hours
Continunous working time 8 hours
Meter part　Weight About 600g
Detection part　Weight about 600g about 1kg about 2.5kg
Meter part　Outside size 146（W）×115（D）×48（H） （It does not contain by the projection part）
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）
 Attache case ― ―
AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.）
An inspection report, a proofreading certificate, traceability system figure
Detection machine size figure
 Detection machine outside figure
Form ＩＰ５０ ＩＰ２００ ＩＰ５００ Detector size
Ａ Φ50 Φ60 Φ80
Ｂ 63 73 99
Ｃ 10 10 15.5
Ｄ Φ90 Φ110 Φ140
Ｅ Φ74 Φ90 Φ116
Ｆ（Three division） Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 9.5ｓｑ 12.7ｓｑ 19ｓｑ
Weight 632g 1.8kg 3kg

DI-1M-IP50日本CEDAR扭力測試儀

Management of air tool / oil pulse tool
●Torque Tester 　DI-1M-IP　series
DI-1M-IP50
Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element,  and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use）  □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.  
Specification ＤＩ-１Ｍ-ＩＰ５０ ＤＩ-１Ｍ-ＩＰ２００ ＤＩ-１Ｍ-ＩＰ５００
Measuring range   （at the time of Track）
0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
 Peak down Operating range 0.70N?m～, 7.0kgf?cm/ lbf?in～ 7.0N?m～, 70kgf?cm/ lbf?in～
Accuracy ±0.5％（F/S）（499 or less digit±3digit）
Display The 4 figures digital display of LED
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold
T-R  Track Indication of real time torque value.
P-D  Peak down Indication peak down point ａnd hold.
Display zero clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
Blow Measurement range Zero to 99 blow
Measurement time 0.1 - 9.9 seconds
Data output RS232C conformity （baud rate 9600）
Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save 5 minutes no use, automatically switch off.
Charging time From empty - less than 6hours
Continunous working time 8 hours
Meter part　Weight About 600g
Detection part　Weight about 600g about 1kg about 2.5kg
Meter part　Outside size 146（W）×115（D）×48（H） （It does not contain by the projection part）
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）
 Attache case ― ―
AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.）
An inspection report, a proofreading certificate, traceability system figure
Detection machine size figure
 Detection machine outside figure
Form ＩＰ５０ ＩＰ２００ ＩＰ５００ Detector size
Ａ Φ50 Φ60 Φ80
Ｂ 63 73 99
Ｃ 10 10 15.5
Ｄ Φ90 Φ110 Φ140
Ｅ Φ74 Φ90 Φ116
Ｆ（Three division） Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 9.5ｓｑ 12.7ｓｑ 19ｓｑ
Weight 632g 1.8kg 3kg

DI-1M-IP500日本CEDAR扭力測試儀

Management of air tool / oil pulse tool
●Torque Tester 　DI-1M-IP　series
DI-1M-IP50
Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element,  and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use）  □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.  
Specification ＤＩ-１Ｍ-ＩＰ５０ ＤＩ-１Ｍ-ＩＰ２００ ＤＩ-１Ｍ-ＩＰ５００
Measuring range   （at the time of Track）
0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
 Peak down Operating range 0.70N?m～, 7.0kgf?cm/ lbf?in～ 7.0N?m～, 70kgf?cm/ lbf?in～
Accuracy ±0.5％（F/S）（499 or less digit±3digit）
Display The 4 figures digital display of LED
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold
T-R  Track Indication of real time torque value.
P-D  Peak down Indication peak down point ａnd hold.
Display zero clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
Blow Measurement range Zero to 99 blow
Measurement time 0.1 - 9.9 seconds
Data output RS232C conformity （baud rate 9600）
Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save 5 minutes no use, automatically switch off.
Charging time From empty - less than 6hours
Continunous working time 8 hours
Meter part　Weight About 600g
Detection part　Weight about 600g about 1kg about 2.5kg
Meter part　Outside size 146（W）×115（D）×48（H） （It does not contain by the projection part）
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）
 Attache case ― ―
AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.）
An inspection report, a proofreading certificate, traceability system figure
Detection machine size figure
 Detection machine outside figure
Form ＩＰ５０ ＩＰ２００ ＩＰ５００ Detector size
Ａ Φ50 Φ60 Φ80
Ｂ 63 73 99
Ｃ 10 10 15.5
Ｄ Φ90 Φ110 Φ140
Ｅ Φ74 Φ90 Φ116
Ｆ（Three division） Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 9.5ｓｑ 12.7ｓｑ 19ｓｑ
Weight 632g 1.8kg 3kg

DIS-IP500日本CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DIS-IP200日本CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DIS-IP50日本CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DIS-IP5日本CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DIS-IP05日本CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DI-1M-IP200日本CEDAR扭力測試儀

Management of air tool / oil pulse tool
●Torque Tester 　DI-1M-IP　series
DI-1M-IP50
Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element,  and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use）  □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.  
Specification ＤＩ-１Ｍ-ＩＰ５０ ＤＩ-１Ｍ-ＩＰ２００ ＤＩ-１Ｍ-ＩＰ５００
Measuring range   （at the time of Track）
0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
 Peak down Operating range 0.70N?m～, 7.0kgf?cm/ lbf?in～ 7.0N?m～, 70kgf?cm/ lbf?in～
Accuracy ±0.5％（F/S）（499 or less digit±3digit）
Display The 4 figures digital display of LED
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold
T-R  Track Indication of real time torque value.
P-D  Peak down Indication peak down point ａnd hold.
Display zero clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
Blow Measurement range Zero to 99 blow
Measurement time 0.1 - 9.9 seconds
Data output RS232C conformity （baud rate 9600）
Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save 5 minutes no use, automatically switch off.
Charging time From empty - less than 6hours
Continunous working time 8 hours
Meter part　Weight About 600g
Detection part　Weight about 600g about 1kg about 2.5kg
Meter part　Outside size 146（W）×115（D）×48（H） （It does not contain by the projection part）
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）
 Attache case ― ―
AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.）
An inspection report, a proofreading certificate, traceability system figure
Detection machine size figure
 Detection machine outside figure
Form ＩＰ５０ ＩＰ２００ ＩＰ５００ Detector size
Ａ Φ50 Φ60 Φ80
Ｂ 63 73 99
Ｃ 10 10 15.5
Ｄ Φ90 Φ110 Φ140
Ｅ Φ74 Φ90 Φ116
Ｆ（Three division） Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 9.5ｓｑ 12.7ｓｑ 19ｓｑ
Weight 632g 1.8kg 3kg

DI-1M-IP50日本CEDAR扭力測試儀

Management of air tool / oil pulse tool
●Torque Tester 　DI-1M-IP　series
DI-1M-IP50
Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element,  and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use）  □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.  
Specification ＤＩ-１Ｍ-ＩＰ５０ ＤＩ-１Ｍ-ＩＰ２００ ＤＩ-１Ｍ-ＩＰ５００
Measuring range   （at the time of Track）
0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
 Peak down Operating range 0.70N?m～, 7.0kgf?cm/ lbf?in～ 7.0N?m～, 70kgf?cm/ lbf?in～
Accuracy ±0.5％（F/S）（499 or less digit±3digit）
Display The 4 figures digital display of LED
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold
T-R  Track Indication of real time torque value.
P-D  Peak down Indication peak down point ａnd hold.
Display zero clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
Blow Measurement range Zero to 99 blow
Measurement time 0.1 - 9.9 seconds
Data output RS232C conformity （baud rate 9600）
Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save 5 minutes no use, automatically switch off.
Charging time From empty - less than 6hours
Continunous working time 8 hours
Meter part　Weight About 600g
Detection part　Weight about 600g about 1kg about 2.5kg
Meter part　Outside size 146（W）×115（D）×48（H） （It does not contain by the projection part）
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）
 Attache case ― ―
AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.）
An inspection report, a proofreading certificate, traceability system figure
Detection machine size figure
 Detection machine outside figure
Form ＩＰ５０ ＩＰ２００ ＩＰ５００ Detector size
Ａ Φ50 Φ60 Φ80
Ｂ 63 73 99
Ｃ 10 10 15.5
Ｄ Φ90 Φ110 Φ140
Ｅ Φ74 Φ90 Φ116
Ｆ（Three division） Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 9.5ｓｑ 12.7ｓｑ 19ｓｑ
Weight 632g 1.8kg 3kg

最新產品

熱門儀器： 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質聯用儀 壓力試驗機 酸度計（PH計） 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質 生物試劑
国产精品久久久一区二区三区_国产一区二区三区视频在线_国产精品一区二区不卡_精品在线一区二区
欧美伊人久久| 亚洲自拍另类| 一区在线观看| 在线免费观看视频一区| 亚洲区第一页| 亚洲欧美另类国产| 久久天堂av综合合色| 欧美成人免费网站| 欧美午夜www高清视频| 国产精品自拍网站| 激情综合网激情| 日韩一区二区电影网| 一本色道精品久久一区二区三区| 午夜一区二区三区在线观看 | 久久男人资源视频| 欧美国产一区视频在线观看| 国产精品久久久久久久久久久久久 | 久久国产精品网站| 欧美精品网站| 国产一区二区三区在线观看网站| 亚洲精品在线看| 欧美一区日韩一区| 欧美乱大交xxxxx| 国产一区二区av| 一本色道婷婷久久欧美| 久久久国产精品一区二区中文| 欧美日韩高清在线观看| 韩国三级电影久久久久久| 一本大道久久a久久综合婷婷| 久久久久国产一区二区三区| 国产精品二区在线观看| 亚洲区欧美区| 久久精品在线免费观看| 国产精品夫妻自拍| 亚洲精品美女久久久久| 久久久久久9999| 国产精品亚洲一区二区三区在线| 亚洲精品国产拍免费91在线| 久久久久久夜| 国产伦精品一区二区三区视频黑人| 亚洲精品乱码久久久久久| 久久久.com| 国产精品一区二区在线观看网站| 亚洲精品中文字| 久久伊人一区二区| 国产亚洲欧美一区二区| 亚洲一区二区伦理| 欧美日本不卡高清| 亚洲国产精品久久久久秋霞影院| 欧美在线你懂的| 国产精品任我爽爆在线播放| 一本色道久久综合亚洲精品婷婷| 欧美14一18处毛片| 一区二区三区在线不卡| 欧美在线视频一区| 国产精品亚洲激情| 亚洲一二三四久久| 欧美三区在线| 一本色道久久99精品综合| 欧美激情免费观看| 亚洲国产一区二区三区a毛片| 久久久一本精品99久久精品66| 国产色产综合产在线视频| 亚洲免费中文| 国产精品乱码一区二三区小蝌蚪 | 久久国内精品自在自线400部| 国产精品亚洲成人| 亚洲在线视频观看| 国产精品白丝黑袜喷水久久久 | 久久久久在线| 韩国av一区二区| 久久国产精品一区二区三区| 国产日产亚洲精品系列| 先锋影音久久久| 国产美女精品一区二区三区| 午夜国产精品视频| 国产欧美日韩免费看aⅴ视频| 亚洲永久精品国产| 国产精品视频九色porn| 亚洲综合色在线| 国产精品午夜电影| 欧美一区二区免费| 国产欧美日韩综合精品二区| 欧美一区午夜精品| 国内久久精品| 久久综合久久综合这里只有精品| 影音先锋在线一区| 欧美成人精品高清在线播放| 亚洲三级性片| 欧美四级电影网站| 午夜精品久久久久久久久| 国产日韩欧美麻豆| 久久亚洲一区| 亚洲日韩视频| 欧美三级乱码| 午夜精品久久99蜜桃的功能介绍| 国产亚洲欧洲| 美女脱光内衣内裤视频久久网站| 亚洲精品女人| 国产精品二区三区四区| 久久精品99国产精品| 永久域名在线精品| 欧美理论电影在线观看| 亚洲自拍偷拍麻豆| 黑人巨大精品欧美黑白配亚洲| 美女精品自拍一二三四| 日韩视频一区二区在线观看| 国产精品久久久久久久久久久久久久| 西瓜成人精品人成网站| 精久久久久久| 欧美精品久久99| 亚洲一区二区欧美日韩| 国产一区91| 欧美成人精品一区二区| 亚洲午夜精品| 国内一区二区三区| 欧美精品一区二区三区很污很色的| 亚洲性视频网址| 一区二区三区在线视频观看| 欧美日本国产| 欧美一区二区女人| 亚洲精品日本| 国产美女诱惑一区二区| 美女国产精品| 亚洲专区一二三| 在线成人h网| 欧美亚洲第一区| 久久婷婷丁香| 亚洲视频第一页| 好吊视频一区二区三区四区| 欧美日韩大片一区二区三区| 性做久久久久久久久| 亚洲人成网站影音先锋播放| 国产精品女主播| 欧美大片91| 欧美在线啊v一区| 日韩视频不卡| 激情欧美一区二区| 欧美性猛交xxxx免费看久久久| 久久美女性网| 亚洲与欧洲av电影| 亚洲国产一二三| 国产亚洲福利一区| 欧美日韩一区二区在线视频| 久久久伊人欧美| 亚洲男女毛片无遮挡| 亚洲激情成人在线| 国产一区二区三区日韩欧美| 欧美日韩精品一区二区| 久久婷婷综合激情| 亚洲欧美在线免费观看| 亚洲精品乱码久久久久久| 激情久久五月天| 国产精品美女www爽爽爽视频| 欧美激情精品久久久久久免费印度| 欧美亚洲在线播放| 在线综合欧美| 亚洲国产欧美久久| 国产一区二区在线观看免费| 国产精品成人在线观看| 欧美国产日韩亚洲一区| 久久久久久久一区二区| 亚洲资源在线观看| 日韩一区二区免费看| 在线免费不卡视频| 国内成+人亚洲| 国产精品视区| 欧美性jizz18性欧美| 欧美另类69精品久久久久9999| 另类图片综合电影| 久久久久国产一区二区| 欧美制服丝袜第一页| 亚洲一区黄色| 一区二区三区国产在线观看| 亚洲精品久久| 亚洲黄色一区二区三区| 精品成人乱色一区二区| 国产亚洲欧洲一区高清在线观看| 国产精品久久久久免费a∨大胸| 欧美人交a欧美精品| 欧美激情精品久久久久久蜜臀 | 国产欧美日韩一区| 国产精品国色综合久久| 欧美日韩免费在线| 欧美理论视频| 欧美精品少妇一区二区三区| 欧美电影在线观看| 欧美mv日韩mv亚洲| 蜜臀av性久久久久蜜臀aⅴ| 久久亚洲电影| 久久亚洲一区二区三区四区| 久久久精品一区| 久久久久国色av免费观看性色| 久久精品一二三| 久久久人成影片一区二区三区| 久久国产精品久久w女人spa| 久久精品99无色码中文字幕| 久久精品亚洲精品国产欧美kt∨| 亚洲欧美日韩精品一区二区| 亚洲一区二区在线观看视频| 亚洲一区二区在线播放| 亚洲欧美日韩在线观看a三区| 亚洲一区三区在线观看| 亚洲午夜久久久久久尤物|