国产精品久久久一区二区三区_国产一区二区三区视频在线_国产精品一区二区不卡_精品在线一区二区

DI-1M-IP500日本CEDAR扭力測試儀

Management of air tool / oil pulse tool
●Torque Tester 　DI-1M-IP　series
DI-1M-IP50
Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element,  and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use）  □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.  
Specification ＤＩ-１Ｍ-ＩＰ５０ ＤＩ-１Ｍ-ＩＰ２００ ＤＩ-１Ｍ-ＩＰ５００
Measuring range   （at the time of Track）
0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
 Peak down Operating range 0.70N?m～, 7.0kgf?cm/ lbf?in～ 7.0N?m～, 70kgf?cm/ lbf?in～
Accuracy ±0.5％（F/S）（499 or less digit±3digit）
Display The 4 figures digital display of LED
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold
T-R  Track Indication of real time torque value.
P-D  Peak down Indication peak down point ａnd hold.
Display zero clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
Blow Measurement range Zero to 99 blow
Measurement time 0.1 - 9.9 seconds
Data output RS232C conformity （baud rate 9600）
Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save 5 minutes no use, automatically switch off.
Charging time From empty - less than 6hours
Continunous working time 8 hours
Meter part　Weight About 600g
Detection part　Weight about 600g about 1kg about 2.5kg
Meter part　Outside size 146（W）×115（D）×48（H） （It does not contain by the projection part）
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）
 Attache case ― ―
AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.）
An inspection report, a proofreading certificate, traceability system figure
Detection machine size figure
 Detection machine outside figure
Form ＩＰ５０ ＩＰ２００ ＩＰ５００ Detector size
Ａ Φ50 Φ60 Φ80
Ｂ 63 73 99
Ｃ 10 10 15.5
Ｄ Φ90 Φ110 Φ140
Ｅ Φ74 Φ90 Φ116
Ｆ（Three division） Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 9.5ｓｑ 12.7ｓｑ 19ｓｑ
Weight 632g 1.8kg 3kg

DIS-IP500日本CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DIS-IP200日本CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DIS-IP50日本CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DIS-IP5日本CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DIS-IP05日本CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DI-1M-IP200日本CEDAR扭力測試儀

Management of air tool / oil pulse tool
●Torque Tester 　DI-1M-IP　series
DI-1M-IP50
Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element,  and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use）  □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.  
Specification ＤＩ-１Ｍ-ＩＰ５０ ＤＩ-１Ｍ-ＩＰ２００ ＤＩ-１Ｍ-ＩＰ５００
Measuring range   （at the time of Track）
0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
 Peak down Operating range 0.70N?m～, 7.0kgf?cm/ lbf?in～ 7.0N?m～, 70kgf?cm/ lbf?in～
Accuracy ±0.5％（F/S）（499 or less digit±3digit）
Display The 4 figures digital display of LED
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold
T-R  Track Indication of real time torque value.
P-D  Peak down Indication peak down point ａnd hold.
Display zero clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
Blow Measurement range Zero to 99 blow
Measurement time 0.1 - 9.9 seconds
Data output RS232C conformity （baud rate 9600）
Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save 5 minutes no use, automatically switch off.
Charging time From empty - less than 6hours
Continunous working time 8 hours
Meter part　Weight About 600g
Detection part　Weight about 600g about 1kg about 2.5kg
Meter part　Outside size 146（W）×115（D）×48（H） （It does not contain by the projection part）
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）
 Attache case ― ―
AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.）
An inspection report, a proofreading certificate, traceability system figure
Detection machine size figure
 Detection machine outside figure
Form ＩＰ５０ ＩＰ２００ ＩＰ５００ Detector size
Ａ Φ50 Φ60 Φ80
Ｂ 63 73 99
Ｃ 10 10 15.5
Ｄ Φ90 Φ110 Φ140
Ｅ Φ74 Φ90 Φ116
Ｆ（Three division） Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 9.5ｓｑ 12.7ｓｑ 19ｓｑ
Weight 632g 1.8kg 3kg

DI-1M-IP50日本CEDAR扭力測試儀

Management of air tool / oil pulse tool
●Torque Tester 　DI-1M-IP　series
DI-1M-IP50
Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element,  and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use）  □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.  
Specification ＤＩ-１Ｍ-ＩＰ５０ ＤＩ-１Ｍ-ＩＰ２００ ＤＩ-１Ｍ-ＩＰ５００
Measuring range   （at the time of Track）
0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
 Peak down Operating range 0.70N?m～, 7.0kgf?cm/ lbf?in～ 7.0N?m～, 70kgf?cm/ lbf?in～
Accuracy ±0.5％（F/S）（499 or less digit±3digit）
Display The 4 figures digital display of LED
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold
T-R  Track Indication of real time torque value.
P-D  Peak down Indication peak down point ａnd hold.
Display zero clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
Blow Measurement range Zero to 99 blow
Measurement time 0.1 - 9.9 seconds
Data output RS232C conformity （baud rate 9600）
Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save 5 minutes no use, automatically switch off.
Charging time From empty - less than 6hours
Continunous working time 8 hours
Meter part　Weight About 600g
Detection part　Weight about 600g about 1kg about 2.5kg
Meter part　Outside size 146（W）×115（D）×48（H） （It does not contain by the projection part）
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）
 Attache case ― ―
AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.）
An inspection report, a proofreading certificate, traceability system figure
Detection machine size figure
 Detection machine outside figure
Form ＩＰ５０ ＩＰ２００ ＩＰ５００ Detector size
Ａ Φ50 Φ60 Φ80
Ｂ 63 73 99
Ｃ 10 10 15.5
Ｄ Φ90 Φ110 Φ140
Ｅ Φ74 Φ90 Φ116
Ｆ（Three division） Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 9.5ｓｑ 12.7ｓｑ 19ｓｑ
Weight 632g 1.8kg 3kg

DI-1M-IP500日本CEDAR扭力測試儀

Management of air tool / oil pulse tool
●Torque Tester 　DI-1M-IP　series
DI-1M-IP50
Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element,  and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use）  □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.  
Specification ＤＩ-１Ｍ-ＩＰ５０ ＤＩ-１Ｍ-ＩＰ２００ ＤＩ-１Ｍ-ＩＰ５００
Measuring range   （at the time of Track）
0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
 Peak down Operating range 0.70N?m～, 7.0kgf?cm/ lbf?in～ 7.0N?m～, 70kgf?cm/ lbf?in～
Accuracy ±0.5％（F/S）（499 or less digit±3digit）
Display The 4 figures digital display of LED
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold
T-R  Track Indication of real time torque value.
P-D  Peak down Indication peak down point ａnd hold.
Display zero clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
Blow Measurement range Zero to 99 blow
Measurement time 0.1 - 9.9 seconds
Data output RS232C conformity （baud rate 9600）
Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save 5 minutes no use, automatically switch off.
Charging time From empty - less than 6hours
Continunous working time 8 hours
Meter part　Weight About 600g
Detection part　Weight about 600g about 1kg about 2.5kg
Meter part　Outside size 146（W）×115（D）×48（H） （It does not contain by the projection part）
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）
 Attache case ― ―
AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.）
An inspection report, a proofreading certificate, traceability system figure
Detection machine size figure
 Detection machine outside figure
Form ＩＰ５０ ＩＰ２００ ＩＰ５００ Detector size
Ａ Φ50 Φ60 Φ80
Ｂ 63 73 99
Ｃ 10 10 15.5
Ｄ Φ90 Φ110 Φ140
Ｅ Φ74 Φ90 Φ116
Ｆ（Three division） Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 9.5ｓｑ 12.7ｓｑ 19ｓｑ
Weight 632g 1.8kg 3kg

DIS-IP500日本CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

最新產品

熱門儀器： 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質聯用儀 壓力試驗機 酸度計（PH計） 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質 生物試劑
国产精品久久久一区二区三区_国产一区二区三区视频在线_国产精品一区二区不卡_精品在线一区二区
亚洲手机成人高清视频| 在线亚洲免费视频| 国产一区视频网站| 国产一区二区三区精品久久久| 国产在线观看91精品一区| 一区二区在线观看视频在线观看| 欧美三级特黄| 国产精品久久久久久久免费软件 | 影视先锋久久| 好吊一区二区三区| 亚洲人成网站在线观看播放| 一区二区三区国产精华| 欧美一区免费| 麻豆精品在线观看| 欧美午夜精品久久久久久孕妇| 国产一区二区三区四区在线观看 | 米奇777在线欧美播放| 欧美日韩国产综合视频在线| 国产精品亚洲视频| 欧美激情综合色综合啪啪| 欧美视频一区| 国内揄拍国内精品久久| 99国产精品久久久久久久成人热| 亚洲欧美中文日韩v在线观看| 久久野战av| 国产精品成人一区| 亚洲国产99精品国自产| 亚洲欧美99| 免费成人你懂的| 久久一区国产| 国产精品白丝av嫩草影院| 国产在线精品二区| 亚洲欧洲三级| 在线综合亚洲欧美在线视频| 亚洲国产成人精品久久久国产成人一区 | 国产精品视频精品视频| 亚洲国产成人精品女人久久久| 亚洲午夜在线观看视频在线| 免费欧美在线| 欧美不卡高清| 国产日韩欧美日韩| 国产亚洲网站| 一区二区三区欧美| 亚洲一区二区免费视频| 蜜臀久久99精品久久久久久9| 国产精品xxxxx| 亚洲国产天堂久久国产91| 香蕉成人啪国产精品视频综合网| 欧美精品在线视频观看| 影音先锋欧美精品| 欧美一区成人| 免费成人av| 国产亚洲视频在线| 亚洲免费一在线| 欧美日韩黄色大片| 亚洲激情在线观看| 久久天天综合| 国产亚洲第一区| 亚洲欧洲av一区二区三区久久| 欧美精品一区二区三区蜜臀| 国产精品久久久久一区| 亚洲美女精品成人在线视频| 久久免费视频在线观看| 国产视频一区欧美| 亚洲综合好骚| 久久久91精品国产一区二区三区 | 99热这里只有精品8| 欧美www在线| 在线看视频不卡| 久久久久久网| 国内久久婷婷综合| 欧美一区二视频在线免费观看| 国产精品免费一区豆花| 亚洲一区二区免费看| 欧美视频第二页| 99视频精品在线| 久久精品99国产精品酒店日本| 国产精品入口| 亚洲欧美国产高清va在线播| 欧美午夜不卡视频| 99精品国产高清一区二区| 欧美理论在线播放| 亚洲精品在线视频观看| 欧美女人交a| 一本久久a久久精品亚洲| 欧美日韩天天操| av不卡免费看| 欧美性一区二区| 亚洲一区二区在线| 国产精品一区在线观看| 欧美一级理论片| 国产在线播精品第三| 久久久国产午夜精品| 伊人狠狠色j香婷婷综合| 亚洲一卡久久| 国产精品萝li| 欧美一区二区在线| 韩国欧美一区| 亚洲一区二区三区高清 | 国产在线欧美| 久久久久久久999精品视频| 欧美午夜精品一区| 亚洲一区三区视频在线观看| 国产精品你懂的在线| 性欧美videos另类喷潮| 国产在线观看一区| 蜜桃av噜噜一区| 亚洲人成在线观看一区二区| 欧美日韩国产不卡在线看| 亚洲视频免费观看| 国产日韩欧美高清免费| 久久性天堂网| 日韩天堂在线视频| 国产精品网站在线| 久久久久久久久久看片| 亚洲精品网站在线播放gif| 国产精品成人在线| 久久精品日韩欧美| 亚洲精美视频| 国产精品久久7| 久久久亚洲高清| 99精品国产福利在线观看免费| 国产精品日韩| 久久综合999| 一区二区三区四区蜜桃| 国产婷婷精品| 欧美国产日韩一区二区三区| 亚洲自拍偷拍网址| 在线观看日韩一区| 欧美三级在线视频| 久久精品国产成人| 亚洲精品美女在线| 国产精品一区二区在线| 免费观看不卡av| 亚洲资源在线观看| 亚洲第一区色| 国产精品视频自拍| 欧美成人亚洲成人日韩成人| 亚洲永久字幕| 亚洲国产天堂久久综合| 国产欧美短视频| 欧美精品一区二区视频| 久久99伊人| 9久草视频在线视频精品| 国产在线精品二区| 欧美性一二三区| 欧美a级一区| 欧美一区二区三区成人| 亚洲精品视频免费观看| 国产伊人精品| 欧美午夜精品久久久久久浪潮| 久久夜精品va视频免费观看| 亚洲欧美国产高清| 亚洲精品一区二| 好吊色欧美一区二区三区四区| 国产精品成人久久久久| 欧美岛国在线观看| 久久精品日韩欧美| 亚洲免费在线视频| 亚洲精品视频免费观看| 一区二区三区在线视频播放 | 国产精品亚洲综合| 欧美激情欧美狂野欧美精品 | 国产精品美女在线观看| 欧美大片一区二区| 久久激情网站| 亚洲一区二区三区在线视频| 亚洲黄色高清| 国内一区二区三区在线视频| 国产精品久久久久影院亚瑟| 欧美精品二区| 另类欧美日韩国产在线| 欧美在线国产| 在线激情影院一区| 欧美激情第8页| 久久性天堂网| 欧美制服第一页| 亚洲与欧洲av电影| 在线综合亚洲欧美在线视频| 国产精品主播| 欧美三日本三级少妇三2023| 欧美国产日本韩| 欧美a级大片| 久久综合色一综合色88| 久久xxxx精品视频| 性欧美xxxx视频在线观看| 亚洲香蕉伊综合在人在线视看| 日韩亚洲欧美一区二区三区| 亚洲精美视频| 亚洲欧洲美洲综合色网| 亚洲国产美女| 亚洲高清资源| 亚洲国产精品毛片| 亚洲国产va精品久久久不卡综合| 黑丝一区二区三区| 国模吧视频一区| 国内精品久久久久影院薰衣草| 国产日韩精品在线观看| 国产欧美在线看| 国产区精品视频| 国产亚洲午夜| 国外成人在线视频| 韩国成人理伦片免费播放| 欧美日韩色婷婷|