国产精品久久久一区二区三区_国产一区二区三区视频在线_国产精品一区二区不卡_精品在线一区二区

DIS-IP500CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DIS-IP200CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DIS-IP50CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DIS-IP5CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DIS-IP05CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DI-1M-IP500CEDAR扭力測試儀

Management of air tool / oil pulse tool
●Torque Tester 　DI-1M-IP　series
DI-1M-IP50
Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element,  and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use）  □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.  
Specification ＤＩ-１Ｍ-ＩＰ５０ ＤＩ-１Ｍ-ＩＰ２００ ＤＩ-１Ｍ-ＩＰ５００
Measuring range   （at the time of Track）
0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
 Peak down Operating range 0.70N?m～, 7.0kgf?cm/ lbf?in～ 7.0N?m～, 70kgf?cm/ lbf?in～
Accuracy ±0.5％（F/S）（499 or less digit±3digit）
Display The 4 figures digital display of LED
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold
T-R  Track Indication of real time torque value.
P-D  Peak down Indication peak down point ａnd hold.
Display zero clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
Blow Measurement range Zero to 99 blow
Measurement time 0.1 - 9.9 seconds
Data output RS232C conformity （baud rate 9600）
Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save 5 minutes no use, automatically switch off.
Charging time From empty - less than 6hours
Continunous working time 8 hours
Meter part　Weight About 600g
Detection part　Weight about 600g about 1kg about 2.5kg
Meter part　Outside size 146（W）×115（D）×48（H） （It does not contain by the projection part）
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）
 Attache case ― ―
AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.）
An inspection report, a proofreading certificate, traceability system figure
Detection machine size figure
 Detection machine outside figure
Form ＩＰ５０ ＩＰ２００ ＩＰ５００ Detector size
Ａ Φ50 Φ60 Φ80
Ｂ 63 73 99
Ｃ 10 10 15.5
Ｄ Φ90 Φ110 Φ140
Ｅ Φ74 Φ90 Φ116
Ｆ（Three division） Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 9.5ｓｑ 12.7ｓｑ 19ｓｑ
Weight 632g 1.8kg 3kg

DI-1M-IP50CEDAR扭力測試儀

Management of air tool / oil pulse tool
●Torque Tester 　DI-1M-IP　series
DI-1M-IP50
Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element,  and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use）  □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.  
Specification ＤＩ-１Ｍ-ＩＰ５０ ＤＩ-１Ｍ-ＩＰ２００ ＤＩ-１Ｍ-ＩＰ５００
Measuring range   （at the time of Track）
0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
 Peak down Operating range 0.70N?m～, 7.0kgf?cm/ lbf?in～ 7.0N?m～, 70kgf?cm/ lbf?in～
Accuracy ±0.5％（F/S）（499 or less digit±3digit）
Display The 4 figures digital display of LED
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold
T-R  Track Indication of real time torque value.
P-D  Peak down Indication peak down point ａnd hold.
Display zero clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
Blow Measurement range Zero to 99 blow
Measurement time 0.1 - 9.9 seconds
Data output RS232C conformity （baud rate 9600）
Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save 5 minutes no use, automatically switch off.
Charging time From empty - less than 6hours
Continunous working time 8 hours
Meter part　Weight About 600g
Detection part　Weight about 600g about 1kg about 2.5kg
Meter part　Outside size 146（W）×115（D）×48（H） （It does not contain by the projection part）
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）
 Attache case ― ―
AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.）
An inspection report, a proofreading certificate, traceability system figure
Detection machine size figure
 Detection machine outside figure
Form ＩＰ５０ ＩＰ２００ ＩＰ５００ Detector size
Ａ Φ50 Φ60 Φ80
Ｂ 63 73 99
Ｃ 10 10 15.5
Ｄ Φ90 Φ110 Φ140
Ｅ Φ74 Φ90 Φ116
Ｆ（Three division） Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 9.5ｓｑ 12.7ｓｑ 19ｓｑ
Weight 632g 1.8kg 3kg

DI-1M-IP200CEDAR扭力測試儀

Management of air tool / oil pulse tool
●Torque Tester 　DI-1M-IP　series
DI-1M-IP50
Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element,  and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use）  □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.  
Specification ＤＩ-１Ｍ-ＩＰ５０ ＤＩ-１Ｍ-ＩＰ２００ ＤＩ-１Ｍ-ＩＰ５００
Measuring range   （at the time of Track）
0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
 Peak down Operating range 0.70N?m～, 7.0kgf?cm/ lbf?in～ 7.0N?m～, 70kgf?cm/ lbf?in～
Accuracy ±0.5％（F/S）（499 or less digit±3digit）
Display The 4 figures digital display of LED
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold
T-R  Track Indication of real time torque value.
P-D  Peak down Indication peak down point ａnd hold.
Display zero clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
Blow Measurement range Zero to 99 blow
Measurement time 0.1 - 9.9 seconds
Data output RS232C conformity （baud rate 9600）
Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save 5 minutes no use, automatically switch off.
Charging time From empty - less than 6hours
Continunous working time 8 hours
Meter part　Weight About 600g
Detection part　Weight about 600g about 1kg about 2.5kg
Meter part　Outside size 146（W）×115（D）×48（H） （It does not contain by the projection part）
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）
 Attache case ― ―
AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.）
An inspection report, a proofreading certificate, traceability system figure
Detection machine size figure
 Detection machine outside figure
Form ＩＰ５０ ＩＰ２００ ＩＰ５００ Detector size
Ａ Φ50 Φ60 Φ80
Ｂ 63 73 99
Ｃ 10 10 15.5
Ｄ Φ90 Φ110 Φ140
Ｅ Φ74 Φ90 Φ116
Ｆ（Three division） Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 9.5ｓｑ 12.7ｓｑ 19ｓｑ
Weight 632g 1.8kg 3kg

DI-9M-8CEDAR扭力測試儀

DI-9 series is most suitable for checking ａnd controlling the torque of Electric Screwdriver ａnd Torque Driver.
upgrade　The main changed parts （1） In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.", etc. display. （2） Change of Measurement Unit Can be Performed   N-m <=> kgf-cm <=>lbf-in  Etc. （3） Setup of Various Numerical Values Can be Easy ａnd Can Carry Out Speedily. （4） Calculation of Maximum, Minimum, ａnd Average Became Intelligible. （5） The call of the saved data became easy. The output of data also became intelligible. （6） Fault charge protection. It is pilot-lamp lighting during charge. （7） Data Output is USB Form （B Type）. （8） Memory Data are 800 Affairs （9） Real-time Output is Every 1 / 180 Seconds.
　　
The best for everyday check of an electric driver Wide measurement range （0 - 8000digit）, it corresponds to various set torques Can measure without inversion/ rolling-back work efficiently by OW joint （PAT.P）.
Specification DI-9M-8 DI-9M-08
Measuring range 0.020-8 N?m 2.0-800 mN?m
0.20～80 kgf?cm
 0.020～8 kgf?cm
0.20～70 lbf?in 0.020～7 lbf?in
Accuracy   ±0.5% （499 digit or less ±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Zero return by one touch Return to zero by pressing clear button.
Measurement   Mode
Track , P-P（peak to peak） , P-D（Peak-Down） , C（Real-time Output）
High ａnd low limits judging function
High ａnd low value are measurement within the limits, ａnd can be set up.
Real-time Output
Load torque value is outputted every about1/ 180 second.
The Maximum, the minimum, ａnd the average value display
The maximum, the minimum, average value, ａnd the data number of 30 data are displayed.It saves to ten channels.
Data Output ASCII format （baud rate 19200）
Auto power save 10 minutes no use, automatically switch off.
Power supply Ni-Cd chargeable battery 1.2V × 5cells 700mAh
Charging time About 3hours
Continuous working time About 12hours
clearance It is a display clearance in set-up time.   （0.1 - 3.0 sec）
Socket size □ 20mm/ □9.5mm
Dimension / Weight W:160×D:125×H:55 / About 1kg
Recommend buffer accessories Measuring joint OW-20/OW-60 Measuring joint OW-025/OW-10
Cube （with a 5th page screw hole）　20x20x20 。∕2.6/M3/M4/M5/M6 Tap processing）
AC/DC adaptor
Exclusive receipt case
An inspection report, a proofreading certificate, a traceability system figure

※Do not use for measurement of impact tool.Do not apply more than the specified torque. 

● MEASURING JOINT OW series
OW joint   Since our company developed the buffer     with little influence of fricative,     stable measurement could be performed    Moreover ,it does not need to reverse-rotate     at the time of  measurement,     ａnd work efficiency  improved.
Specification Type
OW-025 OW-10 OW-20 OW-60
Measuring range   N?m 0.25 1 2 6
Mechanical life   （times） 10,000 8,000 5,000 5,000
Outer diameter size （mm） Bit engagement part （screw part） M2.6 cross recess screw M3 cross recess screw M4 cross recess screw M6 cross recess screw
The standard screw is cross recess screw but they may be altered as necessary
Outside diameter φ28 φ32 φ32 φ38
Height 44 51 51 69
Ｉnstallation 20square ×4（t）

DI-1M-IP50CEDAR扭力測試儀

Management of air tool / oil pulse tool
●Torque Tester 　DI-1M-IP　series
DI-1M-IP50
Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element,  and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use）  □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.  
Specification ＤＩ-１Ｍ-ＩＰ５０ ＤＩ-１Ｍ-ＩＰ２００ ＤＩ-１Ｍ-ＩＰ５００
Measuring range   （at the time of Track）
0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
 Peak down Operating range 0.70N?m～, 7.0kgf?cm/ lbf?in～ 7.0N?m～, 70kgf?cm/ lbf?in～
Accuracy ±0.5％（F/S）（499 or less digit±3digit）
Display The 4 figures digital display of LED
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold
T-R  Track Indication of real time torque value.
P-D  Peak down Indication peak down point ａnd hold.
Display zero clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
Blow Measurement range Zero to 99 blow
Measurement time 0.1 - 9.9 seconds
Data output RS232C conformity （baud rate 9600）
Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save 5 minutes no use, automatically switch off.
Charging time From empty - less than 6hours
Continunous working time 8 hours
Meter part　Weight About 600g
Detection part　Weight about 600g about 1kg about 2.5kg
Meter part　Outside size 146（W）×115（D）×48（H） （It does not contain by the projection part）
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）
 Attache case ― ―
AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.）
An inspection report, a proofreading certificate, traceability system figure
Detection machine size figure
 Detection machine outside figure
Form ＩＰ５０ ＩＰ２００ ＩＰ５００ Detector size
Ａ Φ50 Φ60 Φ80
Ｂ 63 73 99
Ｃ 10 10 15.5
Ｄ Φ90 Φ110 Φ140
Ｅ Φ74 Φ90 Φ116
Ｆ（Three division） Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 9.5ｓｑ 12.7ｓｑ 19ｓｑ
Weight 632g 1.8kg 3kg

最新產(chǎn)品

熱門儀器： 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質(zhì)聯(lián)用儀 壓力試驗機 酸度計（PH計） 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質(zhì) 生物試劑
国产精品久久久一区二区三区_国产一区二区三区视频在线_国产精品一区二区不卡_精品在线一区二区
亚洲国产裸拍裸体视频在线观看乱了中文 | 激情综合中文娱乐网| 国产精品日韩欧美一区| 国产亚洲欧美一区二区三区| 怡红院精品视频在线观看极品| 亚洲国产视频a| 亚洲永久免费视频| 久久久国产午夜精品| 欧美激情一区二区三区不卡| 国产精品日韩在线观看| 亚洲电影第三页| 亚洲天堂av图片| 久久久久国产成人精品亚洲午夜| 欧美成年人网站| 国产精品久久久一区二区| 一区二区三区在线看| 一区二区高清视频| 久久视频在线视频| 欧美午夜激情视频| 一区二区三区在线观看国产| 一区二区三区四区五区精品视频| 午夜精品国产| 欧美亚洲尤物久久| 亚洲人午夜精品| 国产亚洲一二三区| 久久嫩草精品久久久久| 久久国产一区二区三区| 亚洲毛片在线观看| 欧美日韩在线另类| 韩日在线一区| 国产精品推荐精品| 亚洲国产精品99久久久久久久久| 亚洲香蕉网站| 免费在线亚洲欧美| 国产午夜精品理论片a级探花 | 亚洲九九精品| 亚洲精品视频在线播放| 欧美在线视频日韩| 欧美日韩精品一区二区天天拍小说 | 欧美日韩天天操| 国产亚洲亚洲| 亚洲欧美国产77777| 欧美电影在线观看完整版| 国产亚洲综合在线| 亚洲你懂的在线视频| 欧美精品色网| 亚洲福利国产| 久久久久一区二区三区| 国产精品一区二区在线观看| 日韩视频免费在线| 嫩草国产精品入口| 国产一区美女| 午夜在线一区二区| 国产精品观看| 一本一道久久综合狠狠老精东影业| 美女网站久久| 国内自拍视频一区二区三区| 午夜国产一区| 国产精品极品美女粉嫩高清在线| 99re6这里只有精品视频在线观看| 欧美 亚欧 日韩视频在线| 激情国产一区| 久久国产欧美| 国产一区二区电影在线观看| 午夜欧美视频| 国产欧美精品一区aⅴ影院| 亚洲手机视频| 国产精品第十页| 亚洲在线中文字幕| 国产精品久久久久7777婷婷| 99精品久久| 欧美另类专区| av成人毛片| 欧美日韩另类丝袜其他| 99国产精品99久久久久久| 欧美精品自拍| 亚洲精品在线视频| 欧美精品xxxxbbbb| 日韩一级精品| 欧美日韩中文字幕在线| 中文精品99久久国产香蕉| 欧美三区视频| 亚洲影院一区| 国产乱理伦片在线观看夜一区| 亚洲欧美精品在线| 国产片一区二区| 久久精品水蜜桃av综合天堂| 激情成人亚洲| 欧美a级片一区| 亚洲毛片在线观看| 欧美三级资源在线| 亚洲永久在线观看| 国产区日韩欧美| 久久久夜精品| 最新成人在线| 欧美视频不卡中文| 亚洲男女自偷自拍| 国产色视频一区| 国内精品久久久久影院薰衣草| 久久久人成影片一区二区三区 | 在线视频你懂得一区| 亚洲欧美成人一区二区在线电影| 国产精品久久久久久久免费软件| 亚洲已满18点击进入久久| 国产精品免费久久久久久| 性欧美xxxx视频在线观看| 国产又爽又黄的激情精品视频| 久久国产精品久久久久久| 极品尤物久久久av免费看| 欧美+日本+国产+在线a∨观看| 亚洲精品一区二| 国产精品福利av| 久久精品亚洲乱码伦伦中文| 亚洲国产精品v| 欧美三级午夜理伦三级中视频| 先锋亚洲精品| 亚洲电影欧美电影有声小说| 欧美日韩精品一区| 欧美中文字幕不卡| 91久久精品国产91性色 | 在线日韩视频| 欧美日韩国产高清| 羞羞答答国产精品www一本 | 在线看国产一区| 欧美日韩国内| 久久精品国产99精品国产亚洲性色| 最新国产精品拍自在线播放| 欧美搞黄网站| 亚洲一区二区三区精品在线观看| 久久大香伊蕉在人线观看热2| 一区二区三区在线视频播放| 欧美精品在线观看播放| 午夜精品国产更新| 亚洲国产福利在线| 国产精品播放| 久久亚洲私人国产精品va| 一级成人国产| 好看的av在线不卡观看| 欧美日韩视频在线观看一区二区三区| 欧美亚洲三级| 亚洲欧洲一区二区三区久久| 国产精品视频内| 欧美电影免费观看高清| 性欧美8khd高清极品| 91久久精品一区| 国产精品另类一区| 欧美jizzhd精品欧美喷水| 午夜精品久久久久久久99热浪潮 | 国产在线视频欧美| 欧美日韩亚洲一区二区三区在线观看 | 国产精品视频你懂的| 麻豆精品视频在线观看| 亚洲免费影视| 日韩视频免费看| 狠狠色丁香婷婷综合影院| 国产日韩欧美在线播放不卡| 国产精品v亚洲精品v日韩精品| 另类av一区二区| 国内精品久久久久久久影视蜜臀 | 国产亚洲激情视频在线| 欧美日本三区| 久久久中精品2020中文| 亚洲一区在线免费观看| 亚洲欧洲视频在线| 一区二区三区在线高清| 国产精品无人区| 欧美区在线播放| 狂野欧美激情性xxxx| 欧美一区二区三区另类| 在线亚洲成人| 亚洲精品视频在线观看网站| 激情欧美亚洲| 国产日韩欧美视频| 欧美亚洲成人精品| 欧美日韩成人综合天天影院| 牛牛影视久久网| 久久久青草婷婷精品综合日韩| 午夜精品久久久久99热蜜桃导演| 一本色道久久88精品综合| 在线播放亚洲| 极品少妇一区二区三区精品视频| 国产区精品在线观看| 国产精品伦一区| 欧美四级电影网站| 欧美日韩国产综合视频在线观看中文| 榴莲视频成人在线观看| 久久久久久久尹人综合网亚洲| 欧美一区二区视频观看视频| 欧美屁股在线| 在线观看一区视频| 亚洲欧美成人综合| 国产精品美女在线观看| 午夜久久久久久| 亚洲一品av免费观看| 亚洲人成网在线播放| 亚洲国产成人在线播放| 激情综合电影网| 国内外成人免费激情在线视频网站| 国产美女精品免费电影| 国产乱人伦精品一区二区| 国产精品一区免费视频| 国产精品观看| 国产乱码精品一区二区三区五月婷 | 欧美日韩中文字幕在线|