国产精品久久久一区二区三区_国产一区二区三区视频在线_国产精品一区二区不卡_精品在线一区二区

DIS-IP500CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DIS-IP200CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DIS-IP50CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DIS-IP5CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DIS-IP05CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series
Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.
Specification DIS-IP05 ＤIS-ＩＰ5 ＤIS-ＩＰ50 ＤIS-ＩＰ200 ＤIS-ＩＰ500
Measuring range （at  time of Track） 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in
0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in
030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy ±0.5%     （499 or less digit±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat （Baud rate :19200）
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories  （one piece each）
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Ａ Φ40 Φ50 Φ60 Φ80
Ｂ 41.2 63 73 99
Ｃ 5 10 10 15.5
Ｄ Φ60 Φ90 Φ110 Φ140
Ｅ Φ50 Φ74 Φ90 Φ116
Ｆ（Three division） Φ4.2 Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 6.35ｓｑ 9.5ｓｑ 12.7ｓｑ 19ｓｑ
weight 189ｇ 632ｇ 1.8ｋｇ 3ｋｇ

DI-1M-IP500CEDAR扭力測試儀

Management of air tool / oil pulse tool
●Torque Tester 　DI-1M-IP　series
DI-1M-IP50
Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element,  and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use）  □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.  
Specification ＤＩ-１Ｍ-ＩＰ５０ ＤＩ-１Ｍ-ＩＰ２００ ＤＩ-１Ｍ-ＩＰ５００
Measuring range   （at the time of Track）
0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
 Peak down Operating range 0.70N?m～, 7.0kgf?cm/ lbf?in～ 7.0N?m～, 70kgf?cm/ lbf?in～
Accuracy ±0.5％（F/S）（499 or less digit±3digit）
Display The 4 figures digital display of LED
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold
T-R  Track Indication of real time torque value.
P-D  Peak down Indication peak down point ａnd hold.
Display zero clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
Blow Measurement range Zero to 99 blow
Measurement time 0.1 - 9.9 seconds
Data output RS232C conformity （baud rate 9600）
Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save 5 minutes no use, automatically switch off.
Charging time From empty - less than 6hours
Continunous working time 8 hours
Meter part　Weight About 600g
Detection part　Weight about 600g about 1kg about 2.5kg
Meter part　Outside size 146（W）×115（D）×48（H） （It does not contain by the projection part）
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）
 Attache case ― ―
AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.）
An inspection report, a proofreading certificate, traceability system figure
Detection machine size figure
 Detection machine outside figure
Form ＩＰ５０ ＩＰ２００ ＩＰ５００ Detector size
Ａ Φ50 Φ60 Φ80
Ｂ 63 73 99
Ｃ 10 10 15.5
Ｄ Φ90 Φ110 Φ140
Ｅ Φ74 Φ90 Φ116
Ｆ（Three division） Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 9.5ｓｑ 12.7ｓｑ 19ｓｑ
Weight 632g 1.8kg 3kg

DI-1M-IP50CEDAR扭力測試儀

Management of air tool / oil pulse tool
●Torque Tester 　DI-1M-IP　series
DI-1M-IP50
Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element,  and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use）  □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.  
Specification ＤＩ-１Ｍ-ＩＰ５０ ＤＩ-１Ｍ-ＩＰ２００ ＤＩ-１Ｍ-ＩＰ５００
Measuring range   （at the time of Track）
0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
 Peak down Operating range 0.70N?m～, 7.0kgf?cm/ lbf?in～ 7.0N?m～, 70kgf?cm/ lbf?in～
Accuracy ±0.5％（F/S）（499 or less digit±3digit）
Display The 4 figures digital display of LED
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold
T-R  Track Indication of real time torque value.
P-D  Peak down Indication peak down point ａnd hold.
Display zero clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
Blow Measurement range Zero to 99 blow
Measurement time 0.1 - 9.9 seconds
Data output RS232C conformity （baud rate 9600）
Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save 5 minutes no use, automatically switch off.
Charging time From empty - less than 6hours
Continunous working time 8 hours
Meter part　Weight About 600g
Detection part　Weight about 600g about 1kg about 2.5kg
Meter part　Outside size 146（W）×115（D）×48（H） （It does not contain by the projection part）
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）
 Attache case ― ―
AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.）
An inspection report, a proofreading certificate, traceability system figure
Detection machine size figure
 Detection machine outside figure
Form ＩＰ５０ ＩＰ２００ ＩＰ５００ Detector size
Ａ Φ50 Φ60 Φ80
Ｂ 63 73 99
Ｃ 10 10 15.5
Ｄ Φ90 Φ110 Φ140
Ｅ Φ74 Φ90 Φ116
Ｆ（Three division） Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 9.5ｓｑ 12.7ｓｑ 19ｓｑ
Weight 632g 1.8kg 3kg

DI-1M-IP200CEDAR扭力測試儀

Management of air tool / oil pulse tool
●Torque Tester 　DI-1M-IP　series
DI-1M-IP50
Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element,  and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use）  □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.  
Specification ＤＩ-１Ｍ-ＩＰ５０ ＤＩ-１Ｍ-ＩＰ２００ ＤＩ-１Ｍ-ＩＰ５００
Measuring range   （at the time of Track）
0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
 Peak down Operating range 0.70N?m～, 7.0kgf?cm/ lbf?in～ 7.0N?m～, 70kgf?cm/ lbf?in～
Accuracy ±0.5％（F/S）（499 or less digit±3digit）
Display The 4 figures digital display of LED
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold
T-R  Track Indication of real time torque value.
P-D  Peak down Indication peak down point ａnd hold.
Display zero clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
Blow Measurement range Zero to 99 blow
Measurement time 0.1 - 9.9 seconds
Data output RS232C conformity （baud rate 9600）
Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save 5 minutes no use, automatically switch off.
Charging time From empty - less than 6hours
Continunous working time 8 hours
Meter part　Weight About 600g
Detection part　Weight about 600g about 1kg about 2.5kg
Meter part　Outside size 146（W）×115（D）×48（H） （It does not contain by the projection part）
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）
 Attache case ― ―
AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.）
An inspection report, a proofreading certificate, traceability system figure
Detection machine size figure
 Detection machine outside figure
Form ＩＰ５０ ＩＰ２００ ＩＰ５００ Detector size
Ａ Φ50 Φ60 Φ80
Ｂ 63 73 99
Ｃ 10 10 15.5
Ｄ Φ90 Φ110 Φ140
Ｅ Φ74 Φ90 Φ116
Ｆ（Three division） Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 9.5ｓｑ 12.7ｓｑ 19ｓｑ
Weight 632g 1.8kg 3kg

DI-9M-8CEDAR扭力測試儀

DI-9 series is most suitable for checking ａnd controlling the torque of Electric Screwdriver ａnd Torque Driver.
upgrade　The main changed parts （1） In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.", etc. display. （2） Change of Measurement Unit Can be Performed   N-m <=> kgf-cm <=>lbf-in  Etc. （3） Setup of Various Numerical Values Can be Easy ａnd Can Carry Out Speedily. （4） Calculation of Maximum, Minimum, ａnd Average Became Intelligible. （5） The call of the saved data became easy. The output of data also became intelligible. （6） Fault charge protection. It is pilot-lamp lighting during charge. （7） Data Output is USB Form （B Type）. （8） Memory Data are 800 Affairs （9） Real-time Output is Every 1 / 180 Seconds.
　　
The best for everyday check of an electric driver Wide measurement range （0 - 8000digit）, it corresponds to various set torques Can measure without inversion/ rolling-back work efficiently by OW joint （PAT.P）.
Specification DI-9M-8 DI-9M-08
Measuring range 0.020-8 N?m 2.0-800 mN?m
0.20～80 kgf?cm
 0.020～8 kgf?cm
0.20～70 lbf?in 0.020～7 lbf?in
Accuracy   ±0.5% （499 digit or less ±3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （right ａnd left）
Zero return by one touch Return to zero by pressing clear button.
Measurement   Mode
Track , P-P（peak to peak） , P-D（Peak-Down） , C（Real-time Output）
High ａnd low limits judging function
High ａnd low value are measurement within the limits, ａnd can be set up.
Real-time Output
Load torque value is outputted every about1/ 180 second.
The Maximum, the minimum, ａnd the average value display
The maximum, the minimum, average value, ａnd the data number of 30 data are displayed.It saves to ten channels.
Data Output ASCII format （baud rate 19200）
Auto power save 10 minutes no use, automatically switch off.
Power supply Ni-Cd chargeable battery 1.2V × 5cells 700mAh
Charging time About 3hours
Continuous working time About 12hours
clearance It is a display clearance in set-up time.   （0.1 - 3.0 sec）
Socket size □ 20mm/ □9.5mm
Dimension / Weight W:160×D:125×H:55 / About 1kg
Recommend buffer accessories Measuring joint OW-20/OW-60 Measuring joint OW-025/OW-10
Cube （with a 5th page screw hole）　20x20x20 。∕2.6/M3/M4/M5/M6 Tap processing）
AC/DC adaptor
Exclusive receipt case
An inspection report, a proofreading certificate, a traceability system figure

※Do not use for measurement of impact tool.Do not apply more than the specified torque. 

● MEASURING JOINT OW series
OW joint   Since our company developed the buffer     with little influence of fricative,     stable measurement could be performed    Moreover ,it does not need to reverse-rotate     at the time of  measurement,     ａnd work efficiency  improved.
Specification Type
OW-025 OW-10 OW-20 OW-60
Measuring range   N?m 0.25 1 2 6
Mechanical life   （times） 10,000 8,000 5,000 5,000
Outer diameter size （mm） Bit engagement part （screw part） M2.6 cross recess screw M3 cross recess screw M4 cross recess screw M6 cross recess screw
The standard screw is cross recess screw but they may be altered as necessary
Outside diameter φ28 φ32 φ32 φ38
Height 44 51 51 69
Ｉnstallation 20square ×4（t）

DI-1M-IP50CEDAR扭力測試儀

Management of air tool / oil pulse tool
●Torque Tester 　DI-1M-IP　series
DI-1M-IP50
Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element,  and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use）  □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.  
Specification ＤＩ-１Ｍ-ＩＰ５０ ＤＩ-１Ｍ-ＩＰ２００ ＤＩ-１Ｍ-ＩＰ５００
Measuring range   （at the time of Track）
0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in
3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in
3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
 Peak down Operating range 0.70N?m～, 7.0kgf?cm/ lbf?in～ 7.0N?m～, 70kgf?cm/ lbf?in～
Accuracy ±0.5％（F/S）（499 or less digit±3digit）
Display The 4 figures digital display of LED
The measurement direction CW-CCW （right ａnd left）
Measuring mode P-P  Peak Peak load value hold
T-R  Track Indication of real time torque value.
P-D  Peak down Indication peak down point ａnd hold.
Display zero clearance Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
Blow Measurement range Zero to 99 blow
Measurement time 0.1 - 9.9 seconds
Data output RS232C conformity （baud rate 9600）
Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save 5 minutes no use, automatically switch off.
Charging time From empty - less than 6hours
Continunous working time 8 hours
Meter part　Weight About 600g
Detection part　Weight about 600g about 1kg about 2.5kg
Meter part　Outside size 146（W）×115（D）×48（H） （It does not contain by the projection part）
Code length Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）
 Attache case ― ―
AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.）
An inspection report, a proofreading certificate, traceability system figure
Detection machine size figure
 Detection machine outside figure
Form ＩＰ５０ ＩＰ２００ ＩＰ５００ Detector size
Ａ Φ50 Φ60 Φ80
Ｂ 63 73 99
Ｃ 10 10 15.5
Ｄ Φ90 Φ110 Φ140
Ｅ Φ74 Φ90 Φ116
Ｆ（Three division） Φ6.3 Φ8.3 Φ10.5
Ｇ　（Socket intuition affinity） 9.5ｓｑ 12.7ｓｑ 19ｓｑ
Weight 632g 1.8kg 3kg

最新產品

熱門儀器： 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質聯用儀 壓力試驗機 酸度計（PH計） 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質 生物試劑
国产精品久久久一区二区三区_国产一区二区三区视频在线_国产精品一区二区不卡_精品在线一区二区
亚洲美女啪啪| 国产欧美一区二区三区在线老狼| 久久婷婷国产综合精品青草| 久久综合电影| 欧美国产日韩一区二区在线观看 | 激情欧美一区二区三区| 国产一区视频网站| 亚洲国产婷婷香蕉久久久久久99| 9国产精品视频| 欧美一区二区成人6969| 欧美成人精品1314www| 欧美少妇一区| 黑人一区二区| 一区二区冒白浆视频| 欧美在线二区| 欧美理论电影在线播放| 国产欧美一区二区三区国产幕精品| 亚洲国产mv| 亚洲一区在线观看免费观看电影高清| 久久精品伊人| 欧美三级小说| 在线观看视频一区二区| 亚洲专区一区| 欧美激情麻豆| 国产亚洲一级高清| 一本色道久久加勒比88综合| 欧美在线影院在线视频| 欧美日韩国产成人在线| 国内揄拍国内精品少妇国语| 中文国产成人精品| 免费视频亚洲| 国产亚洲欧美aaaa| 亚洲视频专区在线| 欧美成人小视频| 国产亚洲一区在线播放| 亚洲神马久久| 欧美激情按摩在线| 黄色小说综合网站| 午夜精品免费在线| 欧美视频在线看| 亚洲日本精品国产第一区| 久久精品主播| 国产美女高潮久久白浆| 在线视频亚洲欧美| 欧美激情中文不卡| 国产亚洲欧美日韩在线一区| 一本色道久久综合亚洲精品小说| 久久综合狠狠| 韩国成人福利片在线播放| 亚洲图片欧美午夜| 欧美区在线播放| 亚洲激情一区二区| 久久成年人视频| 欧美亚洲第一区| 91久久国产自产拍夜夜嗨| 久久黄色影院| 国产无一区二区| 亚洲视频一二| 欧美精品自拍| 亚洲人成免费| 欧美成va人片在线观看| 国产女精品视频网站免费| 一本色道久久综合精品竹菊| 欧美国产一区二区在线观看| 国产亚洲欧美一区二区三区| 亚洲天堂网在线观看| 欧美成人精品高清在线播放| 黄色精品网站| 欧美一区二区网站| 国产日韩欧美在线一区| 性欧美大战久久久久久久免费观看 | 国产日韩欧美一二三区| 亚洲自拍都市欧美小说| 国产精品qvod| 亚洲无人区一区| 国产精品xxx在线观看www| 一区二区三区视频在线| 欧美日韩天天操| 一区二区不卡在线视频 午夜欧美不卡'| 欧美电影专区| 日韩亚洲欧美一区| 欧美日韩在线影院| 亚洲国产一区二区三区a毛片| 蜜臀va亚洲va欧美va天堂| 亚洲黄色成人久久久| 欧美精品二区| 在线亚洲欧美视频| 国产精品日本一区二区| 欧美一区二区在线| 黄色成人av网| 欧美成熟视频| 在线一区二区日韩| 国产精品有限公司| 久久精品理论片| 1024国产精品| 欧美精品手机在线| 亚洲天堂第二页| 国产欧美日韩免费看aⅴ视频| 久久国产精品电影| 亚洲国产高潮在线观看| 欧美精品九九99久久| 正在播放欧美一区| 国产热re99久久6国产精品| 久久aⅴ乱码一区二区三区| 一区二区三区在线免费视频| 欧美成人久久| 亚洲视频www| 国产一区二区三区久久精品| 美女日韩欧美| 一区二区三区黄色| 国产亚洲精品福利| 欧美成人一区二免费视频软件| 亚洲美女视频在线观看| 国产精品欧美久久| 久久免费视频网| 亚洲美女诱惑| 国产欧美综合在线| 免费欧美日韩国产三级电影| 一区二区激情| 国内精品伊人久久久久av一坑| 欧美aaa级| 亚洲综合另类| 在线免费观看日韩欧美| 欧美日韩综合在线免费观看| 欧美一区二区视频在线观看2020| 亚洲国产精品国自产拍av秋霞| 欧美日韩在线一区二区| 久久国产精品亚洲va麻豆| 亚洲激情在线观看| 国产精品伊人日日| 欧美成人午夜77777| 亚洲在线第一页| 亚洲成人原创| 国产精品人人做人人爽 | 亚洲一区二区三区在线| 国产美女扒开尿口久久久| 久久精品国产一区二区电影| 精品福利电影| 欧美黄色影院| 亚洲一区二区高清视频| 国产午夜久久久久| 另类av一区二区| aaa亚洲精品一二三区| 欧美婷婷在线| 西瓜成人精品人成网站| 狠狠色伊人亚洲综合成人| 欧美激情一区二区三区全黄| 亚洲永久免费观看| 一色屋精品亚洲香蕉网站| 欧美日韩久久| 久久国产加勒比精品无码| 亚洲欧洲精品一区二区三区| 国产精品高潮在线| 久久婷婷麻豆| 在线一区二区三区做爰视频网站| 国产日韩欧美不卡| 欧美成人日韩| 亚洲免费中文字幕| 亚洲高清在线视频| 国产精品久久久久久久久久ktv| 久久精品首页| 99精品国产在热久久婷婷| 国产日韩欧美91| 欧美大片在线观看一区二区| 亚洲欧美日韩专区| 亚洲激情欧美| 国产麻豆午夜三级精品| 欧美成人免费网站| 欧美一区三区二区在线观看| 亚洲精品在线电影| 国产一区二区三区奇米久涩| 欧美日韩国产黄| 久久漫画官网| 亚洲欧美另类在线| 亚洲人成人一区二区三区| 国产午夜精品全部视频在线播放 | 久久网站热最新地址| 欧美精品激情| 欧美中文字幕在线播放| 99在线热播精品免费99热| 韩国免费一区| 国产精品久久久久久久久久妞妞| 麻豆av一区二区三区| 欧美一区二区三区在线观看视频| 亚洲精品一区二区三区婷婷月| 国产亚洲高清视频| 欧美偷拍一区二区| 欧美人与禽猛交乱配| 欧美a级大片| 久久综合伊人77777| 久久精品国产96久久久香蕉| 亚洲男人第一av网站| 亚洲男人的天堂在线观看| 在线视频中文亚洲| 夜夜嗨av一区二区三区四季av| 亚洲另类一区二区| 亚洲美女一区| 日韩天堂av| 一区二区三区av| 亚洲午夜未删减在线观看| 亚洲系列中文字幕| 亚洲欧美大片| 欧美一区二区三区另类| 欧美在线啊v一区|