国产精品久久久一区二区三区_国产一区二区三区视频在线_国产精品一区二区不卡_精品在线一区二区

DIS-RL6日本思達扭力校正儀器

Bolting measurement of screwbolt
仠 TORQUE TESTER 丂DIS-RL series
Separate type merit! Detection part is compact.
DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled.
DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely.
DIS-RL6 Measurement to 6 N丒m  
A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge.
The main functions丂(DIS series)  仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output
Specification DIS-RL05 DIS-RL2 DIS-RL6
Measuring range 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in
Accuracy 亇0.5% (or less 499亇3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword  
C Real-time output Load torque value is outputted every about1/ 180 second by RS232C.
Decision function Setting of torque value A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance It is a display clearance in set-up time.   (0.5 - 3.0 sec)
One-touch zero A clear button is pushedit is a zero. data output.
Data spec. Data transfer ASCII format (Baud rate : 19200)
Data memory 800 data stored
Power supply Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3hours
Continunous working time 10 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Bit/Socket part 兂4 HEX 6.35
Accessories  (one piece each)
 兂4 bits (亄)丂侐0/侐1 6.35HEX bits (亄)丂侐1/侐2
Receipt case
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

DIS-RL2日本思達扭力校正儀器

Bolting measurement of screwbolt
仠 TORQUE TESTER 丂DIS-RL series
Separate type merit! Detection part is compact.
DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled.
DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely.
DIS-RL6 Measurement to 6 N丒m  
A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge.
The main functions丂(DIS series)  仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output
Specification DIS-RL05 DIS-RL2 DIS-RL6
Measuring range 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in
Accuracy 亇0.5% (or less 499亇3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword  
C Real-time output Load torque value is outputted every about1/ 180 second by RS232C.
Decision function Setting of torque value A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance It is a display clearance in set-up time.   (0.5 - 3.0 sec)
One-touch zero A clear button is pushedit is a zero. data output.
Data spec. Data transfer ASCII format (Baud rate : 19200)
Data memory 800 data stored
Power supply Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3hours
Continunous working time 10 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Bit/Socket part 兂4 HEX 6.35
Accessories  (one piece each)
 兂4 bits (亄)丂侐0/侐1 6.35HEX bits (亄)丂侐1/侐2
Receipt case
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

DIS-RL05日本思達扭力校正儀器

Bolting measurement of screwbolt
仠 TORQUE TESTER 丂DIS-RL series
Separate type merit! Detection part is compact.
DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled.
DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely.
DIS-RL6 Measurement to 6 N丒m  
A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge.
The main functions丂(DIS series)  仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output
Specification DIS-RL05 DIS-RL2 DIS-RL6
Measuring range 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in
Accuracy 亇0.5% (or less 499亇3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword  
C Real-time output Load torque value is outputted every about1/ 180 second by RS232C.
Decision function Setting of torque value A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance It is a display clearance in set-up time.   (0.5 - 3.0 sec)
One-touch zero A clear button is pushedit is a zero. data output.
Data spec. Data transfer ASCII format (Baud rate : 19200)
Data memory 800 data stored
Power supply Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3hours
Continunous working time 10 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Bit/Socket part 兂4 HEX 6.35
Accessories  (one piece each)
 兂4 bits (亄)丂侐0/侐1 6.35HEX bits (亄)丂侐1/侐2
Receipt case
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

日本思達牌DI-3N-IP50/DI-3N-IP200扭力校正儀日本思達牌DI-3N-IP50/DI-3N-IP200扭力校正儀

扭力校正儀DI-3N-IP5/IP50/IP200/IP500
制 造 商：思達(CEDAR)
產品種類：測力、拉力儀器
所屬行業：電子及電路板工業模具及五金制造行業
  產品  熱賣產品  
產品簡介：
 詳細內容
日本思達牌扭力校正儀

型號

DI-3N-IP5

DI-3N-IP50

DI-3N-IP200

DI-3N-IP500

DI-3N-IPS

測量范圍

0.01～5N.m0.1～50kgf.cm0.1～45Lbf.in

0.01～50N.m0.1～500kgf.cm0. 1～450Lbf.in

0.1～200N.m1～2000kgf.cm1～1800Lbf.in

0.1～500N.m1～5000kgf.cm0.1～4500Lbf.in

0.01～20N.m0.1～200kgf.cm0.1～180Lbf.in

誤差

±0.5%

功能

LC:LCD顯示，RS：RS232C輸出口，LH：扭力設定功能；MY：數據記憶功能PO：電源自動關閉功能IO：設定自動清零

外形尺寸

88(W)×108(D)×40(H)（不含測頭）

配件

包裝盒/AC充電器各一個

AC充電器各一個

測量頭1個DC20mmM4/M6/M8包裝盒AC充電器各一個

DIS-RL05日本思達扭力校正儀器

Bolting measurement of screwbolt
仠 TORQUE TESTER 丂DIS-RL series
Separate type merit! Detection part is compact.
DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled.
DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely.
DIS-RL6 Measurement to 6 N丒m  
A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge.
The main functions丂(DIS series)  仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output
Specification DIS-RL05 DIS-RL2 DIS-RL6
Measuring range 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in
Accuracy 亇0.5% (or less 499亇3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword  
C Real-time output Load torque value is outputted every about1/ 180 second by RS232C.
Decision function Setting of torque value A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance It is a display clearance in set-up time.   (0.5 - 3.0 sec)
One-touch zero A clear button is pushedit is a zero. data output.
Data spec. Data transfer ASCII format (Baud rate : 19200)
Data memory 800 data stored
Power supply Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3hours
Continunous working time 10 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Bit/Socket part 兂4 HEX 6.35
Accessories  (one piece each)
 兂4 bits (亄)丂侐0/侐1 6.35HEX bits (亄)丂侐1/侐2
Receipt case
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

該公司產品分類： 喜百事 孔徑規 塞尺 EISEN精密針規 FSK精密水平儀 RIKEN精密水平儀 RSK精密水平儀 ONO SEIKI小野轉速計 ASKER橡膠硬度計 TECLOCK得樂橡膠硬度計 ANRITSU安立溫計 PTC表面溫度計 ISUZU東京溫度計 SATO佐滕溫濕度計 SK 國產放大鏡 OTSUKA大冢臺放大鏡 PEAK放大鏡 張力計 扭力工具 推拉力計

DI-RL05CEDAR思達扭力校正儀器

Bolting measurement of screwbolt
仠 TORQUE TESTER 丂DIS-RL series
Separate type merit! Detection part is compact.
DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled.
DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely.
DIS-RL6 Measurement to 6 N丒m  
A new function is carried （1） Display Board Became Legible. 丂（A Measurement modea unit. Other coded data is丂displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge.
The main functions丂（DIS series）  仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time （every about 1/180 seconds）.丂 仩 USB terminal data output
Specification DIS-RL05 DIS-RL2 DIS-RL6
Measuring range 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in
Accuracy 亇0.5% （or less 499亇3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （rightleft）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword  
C Real-time output Load torque value is outputted every about1/ 180 second by RS232C.
Decision function Setting of torque value A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance It is a display clearance in set-up time.   （0.5 - 3.0 sec）
One-touch zero A clear button is pushedit is a zero. data output.
Data spec. Data transfer ASCII format （Baud rate : 19200）
Data memory 800 data stored
Power supply Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3hours
Continunous working time 10 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Bit/Socket part 兂4 HEX 6.35
Accessories  （one piece each）
 兂4 bits （亄）丂侐0/侐1 6.35HEX bits （亄）丂侐1/侐2
Receipt case
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

最新產品
熱門儀器： 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質聯用儀 壓力試驗機 酸度計（PH計） 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質 生物試劑
国产精品久久久一区二区三区_国产一区二区三区视频在线_国产精品一区二区不卡_精品在线一区二区
亚洲欧美日韩视频一区| 欧美日本在线一区| 亚洲美女黄色片| 亚洲国产日韩一区| 亚洲人成欧美中文字幕| 亚洲人成高清| 亚洲四色影视在线观看| 樱桃视频在线观看一区| 欧美日韩一本到| 欧美美女视频| 国产精品视频精品| 伊人一区二区三区久久精品| 最新日韩欧美| 午夜精品久久久久久99热| 欧美日韩午夜视频在线观看| 理论片一区二区在线| 国产精品久久久久高潮| 国产精品v日韩精品| 国产欧美日韩综合精品二区| 狠狠色综合网站久久久久久久| 亚洲国产欧美一区二区三区同亚洲 | 欧美在线视频免费观看| 欧美一级视频精品观看| 欧美成人精品在线| 欧美视频中文在线看| 国内精品视频在线观看| 亚洲一区二区成人在线观看| 久久综合色一综合色88| 欧美伊人精品成人久久综合97| 国产一区二区三区在线观看视频 | 午夜宅男久久久| 蜜臀久久99精品久久久画质超高清| 欧美日韩综合一区| 亚洲国产一区二区a毛片| 亚洲欧洲99久久| 欧美吻胸吃奶大尺度电影| 亚洲黄页一区| 亚洲综合首页| 欧美另类极品videosbest最新版本| 国产乱码精品一区二区三区五月婷| 亚洲区国产区| 欧美激情aⅴ一区二区三区| 狠狠色狠狠色综合| 欧美一级久久久| 欧美性色综合| 亚洲视屏一区| 国产精品成人在线| 国产精品99久久久久久久久久久久 | 国产精品一区二区在线观看不卡 | 国产精品欧美一区喷水| 在线亚洲美日韩| 欧美日韩一区二区三区在线观看免| 亚洲国产经典视频| 欧美高清一区| 亚洲精品视频中文字幕| 欧美精品二区三区四区免费看视频| 亚洲第一在线| 欧美激情黄色片| 亚洲视频碰碰| 国产麻豆一精品一av一免费| 性欧美8khd高清极品| 国内精品模特av私拍在线观看| 久久精品国产第一区二区三区| 精品不卡一区二区三区| 欧美大尺度在线观看| 99精品热视频| 狠狠色香婷婷久久亚洲精品| 女主播福利一区| 亚洲免费观看高清在线观看 | 这里只有精品电影| 国产亚洲午夜| 欧美a级一区| 一区二区三区视频在线观看| 国产精品影视天天线| 老司机精品视频网站| 一本色道精品久久一区二区三区| 国产精品久久婷婷六月丁香| 久久频这里精品99香蕉| 日韩视频精品| 国产在线不卡视频| 欧美日韩精品二区| 久久久久成人精品免费播放动漫| 亚洲精品在线视频| 国产亚洲毛片| 欧美日韩日本视频| 久久综合狠狠综合久久综合88| 精品999成人| 欧美激情一二三区| 欧美福利在线| 亚洲欧美国产日韩天堂区| 亚洲成人原创| 激情一区二区三区| 欧美久久久久久| 麻豆精品网站| 久久久www| 午夜精品福利一区二区三区av| 亚洲黄色在线视频| 影音先锋亚洲电影| 国产亚洲精品bt天堂精选| 国产精品激情电影| 欧美日韩在线一二三| 男人的天堂亚洲在线| 久久久久久久一区二区| 欧美在线免费观看亚洲| 亚洲一级黄色av| 这里只有精品丝袜| av不卡在线看| 中文av一区特黄| 亚洲桃色在线一区| 亚洲一区日本| 欧美在线免费一级片| 午夜欧美理论片| 欧美一区二区大片| 欧美中文字幕在线播放| 久久精品国产99国产精品| 久久久久久免费| 鲁鲁狠狠狠7777一区二区| 久久精品免费播放| 久久综合狠狠综合久久综合88| 久久久久久久91| 美日韩免费视频| 欧美日韩国产探花| 国产精品一二三四区| 国模套图日韩精品一区二区| 1000部国产精品成人观看| 亚洲日本中文字幕区| 亚洲自拍偷拍麻豆| 久久精品亚洲热| 欧美精品一区视频| 国产精品免费久久久久久| 国语自产精品视频在线看一大j8| 在线免费观看日韩欧美| 亚洲乱码国产乱码精品精 | 亚洲深夜av| 亚洲免费网址| 免费一区视频| 国产精品区二区三区日本 | 亚洲二区视频在线| 一区二区激情| 久久精品免费电影| 欧美午夜视频| 国产午夜精品麻豆| 99re6热在线精品视频播放速度| 午夜老司机精品| 欧美三级日本三级少妇99| 黄网站色欧美视频| 亚洲网站啪啪| 欧美激情视频网站| 国产亚洲一区二区三区| 99精品视频免费观看| 久久综合九色综合久99| 国产精品久久毛片a| 亚洲激情一区二区| 久久久久久电影| 国产伦精品一区二区三区在线观看| 亚洲精品看片| 欧美暴力喷水在线| 在线看国产日韩| 久久精品在线播放| 国产欧美日韩一区二区三区在线观看| 99成人免费视频| 欧美日韩福利视频| 亚洲免费观看高清在线观看| 玖玖国产精品视频| 在线观看精品视频| 麻豆精品在线观看| 亚洲成色精品| 欧美成人国产va精品日本一级| 精品福利电影| 女女同性精品视频| 亚洲靠逼com| 欧美色欧美亚洲高清在线视频| 999亚洲国产精| 欧美三级欧美一级| 亚洲在线观看视频网站| 国产精品伦一区| 欧美一区在线视频| 国产无一区二区| 久色婷婷小香蕉久久| 亚洲人成网站影音先锋播放| 欧美剧在线观看| 亚洲欧美日韩一区二区| 国产精品夜色7777狼人| 亚洲欧美日韩精品久久奇米色影视 | 亚洲国产美女| 欧美日本不卡高清| 销魂美女一区二区三区视频在线| 国产性色一区二区| 免费不卡在线观看| 中文亚洲免费| 国内免费精品永久在线视频| 免费成人在线观看视频| 在线视频亚洲欧美| 红桃视频一区| 欧美日韩中文字幕精品| 久久国产精品高清| 亚洲伦理久久| 国产亚洲欧美一区二区三区| 欧美sm极限捆绑bd| 先锋影音国产精品| 亚洲精品美女91| 国内久久精品| 国产精品日韩在线一区| 欧美本精品男人aⅴ天堂|