PROVA 123多功能校正儀
特 點 1.4-20mA(1KΩ負載,24V供應電壓)2.0-100.00mV,0-1.000V,0-12.000V3.K,J,E,T熱電偶(℃，℉)4.頻率輸出1-62500Hz5.0.025%精確度6.操作容易7.單步操作容易,自動斜坡輸出8.0.20mA,0.24mA9.0-100﹪輸入設定(mA,Mv,v)10.過載警示開路(mA),短路(mV,V)
DIS-RL6日本思達扭力校正儀器
| Bolting measurement of screwbolt | |
| 仠 TORQUE TESTER 丂DIS-RL series | |
| Separate type merit! Detection part is compact. | |
 | DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled. |
 | DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely. |
| DIS-RL6 Measurement to 6 N丒m | |
| A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. | |
| The main functions丂(DIS series) 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output | |
| Specification | DIS-RL05 | DIS-RL2 | DIS-RL6 | |||
| Measuring range | 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in | 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in | 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in | |||
| Accuracy | 亇0.5% (or less 499亇3digit) | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW (rightleft) | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second by RS232C. | |||||
| Decision function | Setting of torque value | A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| clearance | It is a display clearance in set-up time. (0.5 - 3.0 sec) | |||||
| One-touch zero | A clear button is pushedit is a zero. data output. | |||||
| Data spec. | Data transfer | ASCII format (Baud rate : 19200) | ||||
| Data memory | 800 data stored | |||||
| Power supply | Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3hours | |||||
| Continunous working time | 10 hours | |||||
| Meter outside type dimension | 100(W) x105(D) x33 (H) (It does not contain by the projection thing.) | |||||
| Weight | Meter part 520g | |||||
| Bit/Socket part | 兂4 | HEX 6.35 | ||||
| Accessories (one piece each) | 兂4 bits (亄)丂侐0/侐1 | 6.35HEX bits (亄)丂侐1/侐2 | ||||
| Receipt case | ||||||
| AC/DC adaptor | ||||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
UPS-III德魯克UPSIII回路校驗儀4-20MA輸出電流電壓校正儀UPS-III
UPS-III 回路校驗儀
UPS III是多功能回路校驗儀。它堅固耐用、結構極緊湊。其尺寸為 3” x 5” ，重量僅為 9.7盎司, 能輕易放入襯衣口袋中。它是回路檢測、儀表維護、閥門設置的重要工具。它使用簡便，操作界面簡單易懂, 可幫您節省操作時間。
圖形顯示測量或輸出0 ~ 24 mA精度：讀數的0.01%百分比讀數同步顯示步進、量程檢查、閥門檢查自動步進和斜坡輸出“快速設置”輸出60 VDC測量回路連續性和開關檢測工具EMC符合EN 61326-1標準產品應用：圖形顯示使用菜單驅動的圖形顯示，比傳統的旋鈕、開關、多功能鍵和雙鍵組合更簡單。測量或輸出0 ~ 24 mA在測量和輸出模式下，都提供內部24V回路電源。這一點在工廠停運期間很重要。精度：讀數的0.01%此精度包括12個月的穩定性和溫度影響。
UPS III對最新式儀表能 進行4:1 校驗，一般情況下，是數字多用表（DMM）精度的20~80 倍。
百分比讀數同步顯示mA讀數和4~ 20 mA或0~20 mA的百分比同時顯示。UPS III也可把mA讀數轉換成流量的百分比。其它許多回路校驗儀不可能做到這一點。
步進、量程檢查、閥門檢查線性測試中的快速步進和零點、量程調整。在閥門模式，能檢查閥門開度及測試開度值。
自動步進和斜坡輸出輸出間隔（1~599s）可調，可單手完成回路檢測、閥門設置和閥門開度檢查。
“快速設置”輸出使用箭頭鍵可以以0.001 mA的間隔設定輸出值。按住箭頭鍵可以快速輸出下一個值。此校驗儀是檢測報警設備的理想工具。
60 VDC測量用于電壓輸出儀器的回路診斷和維修。
回路連續性和開關檢測工具當查找故障、檢查回路完整性及測試開關時，減少了對數字多用表的依賴性。
HART兼容性內部235Ω回路電阻（菜單選擇）
EMC符合EN 61326-1標準符合重工業標準。而大多數回路校驗儀只適合輕工業使用。
PROVA 123多功能校正儀
特 點 1.4-20mA(1KΩ負載,24V供應電壓)2.0-100.00mV,0-1.000V,0-12.000V3.K,J,E,T熱電偶(℃，℉)4.頻率輸出1-62500Hz5.0.025%精確度6.操作容易7.單步操作容易,自動斜坡輸出8.0.20mA,0.24mA9.0-100﹪輸入設定(mA,Mv,v)10.過載警示開路(mA),短路(mV,V)
DIS-RL6日本思達扭力校正儀器
| Bolting measurement of screwbolt | |
| 仠 TORQUE TESTER 丂DIS-RL series | |
| Separate type merit! Detection part is compact. | |
| DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled. |
| DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely. |
| DIS-RL6 Measurement to 6 N丒m | |
| A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. | |
| The main functions丂(DIS series) 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output | |
| Specification | DIS-RL05 | DIS-RL2 | DIS-RL6 | |||
| Measuring range | 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in | 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in | 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in | |||
| Accuracy | 亇0.5% (or less 499亇3digit) | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW (rightleft) | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second by RS232C. | |||||
| Decision function | Setting of torque value | A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| clearance | It is a display clearance in set-up time. (0.5 - 3.0 sec) | |||||
| One-touch zero | A clear button is pushedit is a zero. data output. | |||||
| Data spec. | Data transfer | ASCII format (Baud rate : 19200) | ||||
| Data memory | 800 data stored | |||||
| Power supply | Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3hours | |||||
| Continunous working time | 10 hours | |||||
| Meter outside type dimension | 100(W) x105(D) x33 (H) (It does not contain by the projection thing.) | |||||
| Weight | Meter part 520g | |||||
| Bit/Socket part | 兂4 | HEX 6.35 | ||||
| Accessories (one piece each) | 兂4 bits (亄)丂侐0/侐1 | 6.35HEX bits (亄)丂侐1/侐2 | ||||
| Receipt case | ||||||
| AC/DC adaptor | ||||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
DI-3N-IP5/IP50/IP200/IP500扭力校正儀
產品名稱： DI-3N-IP5/IP50/IP200/IP500扭力校正儀
制 造 商： 思達(CEDAR)
產品種類： 測力、拉力儀器
所屬行業： 電子及電路板工業模具及五金制造行業
深圳吉田科技發展有限公司是一家大型工具量具代理商！我公司經營產品如下: 1、 日本制：TOHNICHI（東日）扭力起子、起力扳手、扭矩表、瓶蓋扭力測試儀 2、 日本制：KANON（中村）扭力工具、起力工具測試儀； 3、 日本制：思達(CEDAR)電批扭力測試儀;亞通力(ATTONIC)電批扭力測試儀； 4、 日本制：AIKOH（愛光）指針、數顯式推拉力計、按鍵測試儀、彈簧拉壓力測試儀； 5、 日本制：SHIMPO（電產）數顯式推拉力計； 6、 日本制：ALGOL指針式推拉力計； 7、 日本制：PEAK（東海）放大鏡； 8、 日本制：EIESN精密針規、SK精密針規； 9、 日本制：MITUTOYO（三豐）測量工具； 10、日本制：JPG精密塞規、環規； 11、日本制：PEACOCK（孔雀）百分表、千分表、測厚表、深度表； 12 日本制：TELOCK（得樂）橡膠硬度計、測厚規、深度表； 13、日本制：FUJITOOL（富士）半徑規、角度尺； 14、日本制：KANETEC（強力牌）V型磁性座、磁性表座； 15、日本制：TOKYO SEIKI（精機株式會社）橫向張力計及紡織專用張力計； 16、日本制：YOKOGAWA（橫河）張力計、線速計；
相關產品鏈接:DI-3N-IP5/IP50/IP200/IP500扭力校正儀 DI-3N-IPS扭力校正儀
日本思達牌DI-3N-IP50/DI-3N-IP200扭力校正儀日本思達牌DI-3N-IP50/DI-3N-IP200扭力校正儀
| 扭力校正儀DI-3N-IP5/IP50/IP200/IP500 | |
| 制 造 商： | 思達(CEDAR) |
| 產品種類： | 測力、拉力儀器 |
| 所屬行業： | 電子及電路板工業模具及五金制造行業 |
| 產品 熱賣產品 | |
| 產品簡介： | |
| 詳細內容 |
| ||||||||||||||||||||||||||||||||||||||||||
JGJ-1 光干涉式甲烷測定器校正儀
JGJ-1 光干涉式甲烷測定器校正儀
適用范圍:JGJ-1型光干涉式甲烷測定器校正儀是采用壓力連通器原理研制的。主要用于校驗光干涉式甲烷測定器的精度及氣密性。
| 項目 | 技術指標 |
| 測量范圍 | （0～10）% CH4 |
| 氣密性 | 700mmH2O(7000Pa)壓力下持續5min,壓力下降≤10Pa |
| 電源電壓 | AC220V/50Hz |
| 輸出電壓 | 1.5V/3V |
| 外形尺寸 | 1335 mm×260 mm×180mm水柱標尺高度:750mm |
| 重量 | 8kg |
HB-4000扭力扳手校正儀 扭力扳手校檢儀
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
HB系列扭力扳手檢定儀
雙量程扭力扳手檢定儀LC系列扭力扳手校正儀LC系列扭力扳手校正儀
日本東日牌LC系列扭力扳手校正儀 | ||||||||||||||||
| ||||||||||||||||
最新產品
- MEIZHOUMA/美洲馬 防砸絕緣防穿刺6KV防寒中幫勞保皮靴 MZ615 2025/12/2 22:02:05
- LEYBOLD萊寶分子泵維修SL80 2025/12/2 20:37:46
- 菲希爾SIGMASCOPE SMP350金屬電導率儀 2025/12/2 18:52:03
- 德國菲希爾SMP350金屬電導率儀FS40測量探頭 2025/12/2 18:36:25
- 德國菲希爾SMP350渦流電導率測量儀 2025/12/2 18:32:50
- 德國菲希爾SMP350非鐵金屬電導率儀 2025/12/2 18:32:15
- 德國Fischer菲希爾SMP350非鐵金屬電導率儀 2025/12/2 18:31:58
- SMP350電導率儀德國Fischer菲希爾 2025/12/2 18:27:57
- 德國Fischer菲希爾?DUALSCOPE DMP20/40涂層測厚儀 2025/12/2 18:24:58
- 德國Fischer菲希爾?DELTASCOPE DMP10/30磁性測厚儀 2025/12/2 18:24:07
- 德國Fischer菲希爾DELTASCOPE DMP10/30膜厚計 2025/12/2 18:23:39
- 德國Fischer菲希爾膜厚計DMP10/20/30/40 2025/12/2 18:22:13
- 德國Fischer菲希爾D-FN-sm兩用探頭 2025/12/2 18:20:38
- 德國Fischer菲希爾D-F磁性探頭 2025/12/2 18:20:03
- 德國Fischer菲希爾FGAB1.3磁性探頭 2025/12/2 18:19:37
- 德國Fischer菲希爾FAI3.3-150渦流探頭 2025/12/2 18:19:01
- FAI3.3-150渦流探頭ISOSCOPE DMP30膜厚計 2025/12/2 18:18:38
- FAI3.3-150渦流探頭ISOSCOPE DMP10涂層測厚儀 2025/12/2 18:17:37
- 德國菲希爾DELTASCOPE DMP10磁性膜厚儀 2025/12/2 18:16:59
- 德國菲希爾DELTASCOPE DMP10膜厚儀 2025/12/2 18:13:42
- 德國菲希爾膜厚計ISOSCOPE DMP30渦流測厚儀 2025/12/2 18:12:44
- 德國菲希爾膜厚計ISOSCOPE DMP30膜厚儀D-N渦流探頭 2025/12/2 18:12:28
- 德國Fischer菲希爾ISOSCOPE DMP30膜厚儀 2025/12/2 18:11:57
- 德國菲希爾ISOSCOPE DMP30涂層測厚儀FTA3.3H渦流探頭 2025/12/2 18:11:31
- ISOSCOPE DMP30涂層測厚儀FTA3.3H渦流探頭 2025/12/2 18:10:06
- 德國菲希爾渦流相位測厚儀PHASCOPE PMP10 DUPLEX 2025/12/2 18:02:31
- PHASCOPE PMP10 DUPLEX 涂層測厚儀ESG20測量探頭 2025/12/2 18:01:56
- 德國Fischer菲希爾PHASCOPE PMP10 DUPLEX 涂層測厚儀 2025/12/2 18:01:06
- PHASCOPE PMP10 DUPLEX 涂層測厚儀 2025/12/2 18:00:52
- 力士樂REXROTH溢流閥R900423721 2025/12/2 17:58:44