国产精品久久久一区二区三区_国产一区二区三区视频在线_国产精品一区二区不卡_精品在线一区二区

DIS-IP200日本思達扭力測試儀器

Measurement of torque driver / torque wrench
仠 TORQUE TESTER 丂DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output 仩It is a rechargeable battery drive, the installation to the spot is also easy. 仩By the auto power OFF, It prevents forgetting to turn off the power. 仩One-touch zero adjustment 仩An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. 丂丂It is very convenient for a continuous check. 仩The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 俢IS-俬俹5 俢IS-俬俹50 俢IS-俬俹200 俢IS-俬俹500
Measuring range (at  time of Track) 2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in
0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in
030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in
3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in
3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in
Accuracy 亇0.5%     (499 or less digit亇3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
俙 兂40 兂50 兂60 兂80
俛 41.2 63 73 99
俠 5 10 10 15.5
俢 兂60 兂90 兂110 兂140
俤 兂50 兂74 兂90 兂116
俥(Three division) 兂4.2 兂6.3 兂8.3 兂10.5
俧丂(Socket intuition affinity) 6.35倱倯 9.5倱倯 12.7倱倯 19倱倯
weight 189倗 632倗 1.8倠倗 3倠倗
 

DIS-IP5日本思達扭力測試儀器

Measurement of torque driver / torque wrench
仠 TORQUE TESTER 丂DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output 仩It is a rechargeable battery drive, the installation to the spot is also easy. 仩By the auto power OFF, It prevents forgetting to turn off the power. 仩One-touch zero adjustment 仩An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. 丂丂It is very convenient for a continuous check. 仩The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 俢IS-俬俹5 俢IS-俬俹50 俢IS-俬俹200 俢IS-俬俹500
Measuring range (at  time of Track) 2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in
0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in
030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in
3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in
3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in
Accuracy 亇0.5%     (499 or less digit亇3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
俙 兂40 兂50 兂60 兂80
俛 41.2 63 73 99
俠 5 10 10 15.5
俢 兂60 兂90 兂110 兂140
俤 兂50 兂74 兂90 兂116
俥(Three division) 兂4.2 兂6.3 兂8.3 兂10.5
俧丂(Socket intuition affinity) 6.35倱倯 9.5倱倯 12.7倱倯 19倱倯
weight 189倗 632倗 1.8倠倗 3倠倗
 

DIS-IP50日本思達扭力測試儀

Measurement of torque driver / torque wrench
仠 TORQUE TESTER 丂DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output 仩It is a rechargeable battery drive, the installation to the spot is also easy. 仩By the auto power OFF, It prevents forgetting to turn off the power. 仩One-touch zero adjustment 仩An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. 丂丂It is very convenient for a continuous check. 仩The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 俢IS-俬俹5 俢IS-俬俹50 俢IS-俬俹200 俢IS-俬俹500
Measuring range (at  time of Track) 2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in
0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in
030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in
3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in
3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in
Accuracy 亇0.5%     (499 or less digit亇3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
俙 兂40 兂50 兂60 兂80
俛 41.2 63 73 99
俠 5 10 10 15.5
俢 兂60 兂90 兂110 兂140
俤 兂50 兂74 兂90 兂116
俥(Three division) 兂4.2 兂6.3 兂8.3 兂10.5
俧丂(Socket intuition affinity) 6.35倱倯 9.5倱倯 12.7倱倯 19倱倯
weight 189倗 632倗 1.8倠倗 3倠倗
 

DIS-IP5日本思達扭力測試儀

Measurement of torque driver / torque wrench
仠 TORQUE TESTER 丂DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output 仩It is a rechargeable battery drive, the installation to the spot is also easy. 仩By the auto power OFF, It prevents forgetting to turn off the power. 仩One-touch zero adjustment 仩An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. 丂丂It is very convenient for a continuous check. 仩The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 俢IS-俬俹5 俢IS-俬俹50 俢IS-俬俹200 俢IS-俬俹500
Measuring range (at  time of Track) 2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in
0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in
030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in
3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in
3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in
Accuracy 亇0.5%     (499 or less digit亇3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
俙 兂40 兂50 兂60 兂80
俛 41.2 63 73 99
俠 5 10 10 15.5
俢 兂60 兂90 兂110 兂140
俤 兂50 兂74 兂90 兂116
俥(Three division) 兂4.2 兂6.3 兂8.3 兂10.5
俧丂(Socket intuition affinity) 6.35倱倯 9.5倱倯 12.7倱倯 19倱倯
weight 189倗 632倗 1.8倠倗 3倠倗
 

DIS-IPS20C日本思達扭力測試儀

Measurement of bolting machines
仠 TORQUE TESTER 丂DIS-IPS
Performance check of an electric driver Management of the bolting torque of an automatic line A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. Detection part is very a compact! The best for measurement of an automatic line OW join. it rewinds atis needlessness. Disply screen became large. It is very legible .It became large 1.5times. Various attachments are attached. Measurement is possible,with a bit attached. The main features 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output
DIS-IPS
Specification DIS-IPS20C DIS-IPS5C
Measuring range 0.20乣20 N 丂丂2.0乣200 kgf丒cm丂丂 2.0乣180 lbf丒in 0.020乣5 N?/span>m 0.20乣50 kgf丒cm 0.20乣45 lbf丒in
Accuracy 亇0.5%     (499 or less digit亇3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword.
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch-Zero Clearance Easy Zero-Adjustment with pressing CLEAR button
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Data spec. Data transfer ASCII format (Baud rate : 19200)
Data memory 800 data stored
Power supply Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time From empty - about 3hours
Continunous working time 12 hours
Attachment fit mouth 仩20倣m丂
Meter outside type dimension 100乮W乯亊105乮D乯亊33乮俫乯
Weight Meter part    520g
Attachment Fixed   Attachment丂仩20噊丂M4/M5/M6/M8
OW joint丂OW-20 OW joint丂OW-10
Accessories  (one piece each) AC/DC adaptor (Please choose AC adaptor out of 120V,230V.)
An inspection report, a proofreading certificate, a traceability system figure

OW joint is a measurement end at one-touch. It binds tightmeasurement is completed only by the work of a direction. Inversion operation like the former is unnecessary.Since the fit part with a bit is the screw head, where a bit is attached, it can be measured.By the conventional method, friction of a screw part had affected the measurement result.This joint has the structure where it is not influenced of fricative,can manage torque stabilized over the long period of time

DIS-IP200日本思達扭力測試儀器

Measurement of torque driver / torque wrench
仠 TORQUE TESTER 丂DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output 仩It is a rechargeable battery drive, the installation to the spot is also easy. 仩By the auto power OFF, It prevents forgetting to turn off the power. 仩One-touch zero adjustment 仩An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. 丂丂It is very convenient for a continuous check. 仩The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 俢IS-俬俹5 俢IS-俬俹50 俢IS-俬俹200 俢IS-俬俹500
Measuring range (at  time of Track) 2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in
0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in
030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in
3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in
3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in
Accuracy 亇0.5%     (499 or less digit亇3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
俙 兂40 兂50 兂60 兂80
俛 41.2 63 73 99
俠 5 10 10 15.5
俢 兂60 兂90 兂110 兂140
俤 兂50 兂74 兂90 兂116
俥(Three division) 兂4.2 兂6.3 兂8.3 兂10.5
俧丂(Socket intuition affinity) 6.35倱倯 9.5倱倯 12.7倱倯 19倱倯
weight 189倗 632倗 1.8倠倗 3倠倗
 

DIS-IP5日本思達扭力測試儀器

Measurement of torque driver / torque wrench
仠 TORQUE TESTER 丂DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output 仩It is a rechargeable battery drive, the installation to the spot is also easy. 仩By the auto power OFF, It prevents forgetting to turn off the power. 仩One-touch zero adjustment 仩An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. 丂丂It is very convenient for a continuous check. 仩The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 俢IS-俬俹5 俢IS-俬俹50 俢IS-俬俹200 俢IS-俬俹500
Measuring range (at  time of Track) 2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in
0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in
030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in
3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in
3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in
Accuracy 亇0.5%     (499 or less digit亇3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
俙 兂40 兂50 兂60 兂80
俛 41.2 63 73 99
俠 5 10 10 15.5
俢 兂60 兂90 兂110 兂140
俤 兂50 兂74 兂90 兂116
俥(Three division) 兂4.2 兂6.3 兂8.3 兂10.5
俧丂(Socket intuition affinity) 6.35倱倯 9.5倱倯 12.7倱倯 19倱倯
weight 189倗 632倗 1.8倠倗 3倠倗
 

DIS-IP500日本思達扭力測試儀

Measurement of torque driver / torque wrench
仠 TORQUE TESTER 丂DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output 仩It is a rechargeable battery drive, the installation to the spot is also easy. 仩By the auto power OFF, It prevents forgetting to turn off the power. 仩One-touch zero adjustment 仩An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. 丂丂It is very convenient for a continuous check. 仩The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 俢IS-俬俹5 俢IS-俬俹50 俢IS-俬俹200 俢IS-俬俹500
Measuring range (at  time of Track) 2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in
0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in
030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in
3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in
3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in
Accuracy 亇0.5%     (499 or less digit亇3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
俙 兂40 兂50 兂60 兂80
俛 41.2 63 73 99
俠 5 10 10 15.5
俢 兂60 兂90 兂110 兂140
俤 兂50 兂74 兂90 兂116
俥(Three division) 兂4.2 兂6.3 兂8.3 兂10.5
俧丂(Socket intuition affinity) 6.35倱倯 9.5倱倯 12.7倱倯 19倱倯
weight 189倗 632倗 1.8倠倗 3倠倗
 

DIS-IP200日本思達扭力測試儀

Measurement of torque driver / torque wrench
仠 TORQUE TESTER 丂DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output 仩It is a rechargeable battery drive, the installation to the spot is also easy. 仩By the auto power OFF, It prevents forgetting to turn off the power. 仩One-touch zero adjustment 仩An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. 丂丂It is very convenient for a continuous check. 仩The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 俢IS-俬俹5 俢IS-俬俹50 俢IS-俬俹200 俢IS-俬俹500
Measuring range (at  time of Track) 2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in
0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in
030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in
3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in
3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in
Accuracy 亇0.5%     (499 or less digit亇3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
俙 兂40 兂50 兂60 兂80
俛 41.2 63 73 99
俠 5 10 10 15.5
俢 兂60 兂90 兂110 兂140
俤 兂50 兂74 兂90 兂116
俥(Three division) 兂4.2 兂6.3 兂8.3 兂10.5
俧丂(Socket intuition affinity) 6.35倱倯 9.5倱倯 12.7倱倯 19倱倯
weight 189倗 632倗 1.8倠倗 3倠倗
 

DIS-IP500日本思達扭力測試儀

Measurement of torque driver / torque wrench
仠 TORQUE TESTER 丂DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output 仩It is a rechargeable battery drive, the installation to the spot is also easy. 仩By the auto power OFF, It prevents forgetting to turn off the power. 仩One-touch zero adjustment 仩An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. 丂丂It is very convenient for a continuous check. 仩The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 俢IS-俬俹5 俢IS-俬俹50 俢IS-俬俹200 俢IS-俬俹500
Measuring range (at  time of Track) 2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in
0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in
030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in
3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in
3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in
Accuracy 亇0.5%     (499 or less digit亇3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
 AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
 Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
俙 兂40 兂50 兂60 兂80
俛 41.2 63 73 99
俠 5 10 10 15.5
俢 兂60 兂90 兂110 兂140
俤 兂50 兂74 兂90 兂116
俥(Three division) 兂4.2 兂6.3 兂8.3 兂10.5
俧丂(Socket intuition affinity) 6.35倱倯 9.5倱倯 12.7倱倯 19倱倯
weight 189倗 632倗 1.8倠倗 3倠倗
 

最新產品

熱門儀器： 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質聯用儀 壓力試驗機 酸度計（PH計） 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質 生物試劑
国产精品久久久一区二区三区_国产一区二区三区视频在线_国产精品一区二区不卡_精品在线一区二区
伊人春色精品| 欧美大胆成人| 99视频一区二区| aⅴ色国产欧美| 亚洲欧洲99久久| 久久精品亚洲热| 另类激情亚洲| 欧美日韩精品一区二区三区四区| 欧美三级黄美女| 国产一区二区观看| 亚洲国产1区| 亚洲伊人网站| 久久只有精品| 欧美日韩综合| 国产一区视频在线观看免费| 亚洲观看高清完整版在线观看| 亚洲美女黄色| 欧美一区成人| 欧美福利视频在线观看| 国产精品久久久久久久午夜| 伊人婷婷欧美激情| 亚洲天堂网站在线观看视频| 久久精品夜色噜噜亚洲aⅴ| 欧美人与禽猛交乱配视频| 国产日本欧美一区二区| 亚洲精品黄色| 欧美在线播放| 欧美日韩播放| 国产综合精品一区| 亚洲视频在线一区| 蜜臀a∨国产成人精品| 国产精品久久久久一区| 亚洲国产精品一区二区第四页av | 国产精品人人爽人人做我的可爱 | 欧美视频一区二区三区四区| 国产一区二区三区在线播放免费观看| 亚洲国产日韩在线一区模特| 午夜国产精品视频免费体验区| 免费看的黄色欧美网站| 国产精品乱码一区二三区小蝌蚪| 精品1区2区| 亚洲免费综合| 欧美全黄视频| 亚洲福利免费| 欧美在线高清| 国产精品久久久999| 最新日韩在线| 久久久高清一区二区三区| 国产精品家教| 日韩视频不卡中文| 每日更新成人在线视频| 国产日本欧洲亚洲| 亚洲一区二区在线| 欧美日韩影院| 亚洲精品视频在线播放| 久久综合久色欧美综合狠狠| 国产欧美日韩亚洲一区二区三区| 99xxxx成人网| 欧美国产一区二区三区激情无套| 黄色一区二区三区| 欧美资源在线| 国产欧美精品一区aⅴ影院| 亚洲色无码播放| 欧美日本二区| 亚洲精品资源| 欧美国产日本在线| 亚洲国产精品久久91精品| 久久久福利视频| 国产亚洲精品激情久久| 午夜在线观看免费一区| 国产精品嫩草99av在线| 亚洲视频国产视频| 欧美日韩另类在线| 日韩午夜免费| 欧美韩国一区| 日韩午夜在线观看视频| 欧美激情一区二区三区不卡| 亚洲国产一区二区三区青草影视 | 国产精品99久久久久久宅男| 欧美日韩国产区| 日韩亚洲不卡在线| 欧美日韩国产91| 日韩视频在线你懂得| 欧美女人交a| 一本综合久久| 欧美午夜精品理论片a级大开眼界| 一区二区三区精品国产| 欧美体内she精视频在线观看| 在线性视频日韩欧美| 国产精品ⅴa在线观看h| 亚洲一区一卡| 国产伦精品一区二区三区四区免费 | 一区二区三区偷拍| 欧美日韩性生活视频| 中国成人在线视频| 国产精品美女久久久免费| 亚洲欧美激情一区| 国产欧美一区二区三区在线老狼| 欧美淫片网站| 激情六月婷婷综合| 久久精品久久99精品久久| 韩国成人精品a∨在线观看| 久久久最新网址| 亚洲成人原创| 欧美不卡在线视频| 99国内精品久久| 欧美性大战久久久久| 亚洲欧美日韩高清| 国内精品99| 欧美成人午夜视频| 中文亚洲字幕| 国产亚洲观看| 欧美成人日韩| 亚洲天堂av高清| 国产亚洲人成网站在线观看| 久久久夜色精品亚洲| 亚洲精品乱码久久久久久久久| 欧美三级免费| 欧美专区在线| 亚洲国内在线| 国产精品xxx在线观看www| 久久国产日韩| 亚洲人成艺术| 国产乱肥老妇国产一区二| 久久中文久久字幕| 一本久久a久久精品亚洲| 国产日韩欧美一区二区三区在线观看| 久久天天狠狠| 一区二区三区日韩| 国产一区二区三区在线观看网站| 欧美成人情趣视频| 亚洲欧美日韩国产中文在线| 国外成人在线视频| 欧美日韩国产在线一区| 欧美在线视频日韩| 欧美11—12娇小xxxx| 一本色道久久88精品综合| 国产日韩欧美麻豆| 欧美激情精品久久久六区热门| 亚洲女女做受ⅹxx高潮| 亚洲国产福利在线| 国产精品少妇自拍| 欧美黄网免费在线观看| 欧美一区二区三区另类| 亚洲精品在线一区二区| 国产一区二区久久久| 欧美日韩八区| 久久在线免费| 午夜精品一区二区三区四区| 亚洲国语精品自产拍在线观看| 国产精品亚洲第一区在线暖暖韩国| 免费欧美电影| 欧美在线视频免费观看| 亚洲免费播放| 黄色一区二区三区四区| 国产精品嫩草久久久久| 欧美高清日韩| 久久超碰97中文字幕| 99精品国产99久久久久久福利| 国内在线观看一区二区三区| 国产精品magnet| 欧美激情麻豆| 久久综合伊人77777蜜臀| 亚洲欧美一区二区三区久久| 亚洲精品一区二区三区99| 韩日成人av| 国产欧美一区二区精品性色 | 1000部国产精品成人观看| 国产精品青草久久| 欧美日韩亚洲一区二区三区在线观看| 久久综合激情| 久久狠狠婷婷| 亚洲欧美日本伦理| 一区二区高清视频| 亚洲日本va在线观看| 欲色影视综合吧| 国产一区二区视频在线观看| 国产精品女人网站| 欧美日韩视频不卡| 欧美激情一区二区三区在线视频观看 | 在线成人免费视频| 国产午夜久久久久| 国产精品久久久一本精品| 欧美精选在线| 欧美成人午夜视频| 麻豆成人综合网| 久久久久五月天| 久久国产手机看片| 欧美在线观看视频一区二区三区 | 欧美精品七区| 牛牛国产精品| 免费看成人av| 免费在线看一区| 卡一卡二国产精品| 久久午夜国产精品| 久久综合一区| 玖玖玖国产精品| 免费观看日韩| 欧美高清在线视频观看不卡| 欧美大片一区二区三区| 欧美二区在线观看| 欧美激情女人20p| 欧美精品亚洲精品| 欧美日本中文字幕|